TMK212B7473KD-T [TAIYO YUDEN]
Capacitor, Ceramic, Chip, General Purpose, 0.047uF, 25V, ±10%, X7R, 0805 (2012 mm), 0.008"T, -55º ~ +125ºC, 7" Reel/4mm pitch;
| 型号： | TMK212B7473KD-T |
| 厂家： | 
TAIYO YUDEN (U.S.A.), INC |
| 描述： | Capacitor, Ceramic, Chip, General Purpose, 0.047uF, 25V, ±10%, X7R, 0805 (2012 mm), 0.008"T, -55º ~ +125ºC, 7" Reel/4mm pitch 电容器 |
| 文件： | 总48页 (文件大小：1138K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Notice for TAIYO YUDEN productsꢀ
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2013. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-
fore practical application or usage of the Products.
Please note that TAIYO YUDEN CO., LTD. shall not be responsible for any defects in products or equipment incor-
porating such products, which are caused under the conditions other than those specified in this catalog or indi-
vidual specification.
■ Please contact TAIYO YUDEN CO., LTD. for further details of product specifications as the individual specification
is available.
■ Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■ All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact TAIYO YUDEN CO., LTD. for more detail in ad-
vance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma-
rine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil-
ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-
tors (so called“TAIYO YUDEN’s official sales channel”).
It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel.
■ Please note that TAIYO YUDEN CO., LTD. shall have no responsibility for any controversies or disputes that may
occur in connection with a third party's intellectual property rights and other related rights arising from your usage
of products in this catalog. TAIYO YUDEN CO., LTD. grants no license for such rights.
■ Caution for export
Certain items in this catalog may require specific procedures for export according to“Foreign Exchange and For-
eign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
MULTILAYER CERAMIC CAPACITORS
WAVE
REFLOW
■PARTS NUMBER
△＝Blank space
J
M
K
3
1
6
△
⑤
B
J
1
0
6
M
L
－
⑩
T
△
⑫
①
②
③
④
⑥
⑦
⑧
⑨
⑪
①Rated voltage
③End termination
Code
P
Rated voltage［VDC］
Code
End termination
2.5
4
K
S
Plated
A
Cu Internal Electrodes
J
6.3
10
④Dimension（L×W）
Type
L
Dimensions
E
16
EIA（inch）
（L×W）［mm］
0.4 × 0.2
T
25
042
063
01005
0201
0402
0204
0603
0306
0805
0508
1206
1210
1812
G
U
35
0.6 × 0.3
50
1.0 × 0.5
H
100
250
630
105
107
212
0.52× 1.0 ※
1.6 × 0.8
Q
S
0.8 × 1.6 ※
2.0 × 1.25
1.25× 2.0 ※
3.2 × 1.6
②Series name
Code
M
Series name
316
325
432
Multilayer ceramic capacitor
3.2 × 2.5
V
Multilayer ceramic capacitor for high frequency
LW reverse type multilayer capacitor
4.5 × 3.2
W
Note : ※LW reverse type（□WK） only
⑤Dimension tolerance
Code
△
Type
ALL
063
L［mm］
W［mm］
T［mm］
Standard
Standard
Standard
0.6±0.05
1.0±0.10
0.3±0.05
0.3±0.05
0.5±0.10
105
0.5±0.10
107
1.6＋0.15/－0.05
0.8＋0.15/－0.05
0.8＋0.15/－0.05
0.45±0.05
A
212
2.0＋0.15/－0.05
1.25＋0.15/－0.05
1.6±0.20
0.85±0.10
1.25＋0.15/－0.05
0.85±0.10
316
3.2±0.20
1.6±0.20
325
105
3.2±0.30
2.5±0.30
2.5±0.30
1.0＋0.15/－0.05
0.5＋0.15/－0.05
0.5＋0.15/－0.05
0.45±0.05
107
212
1.6＋0.20/－0
2.0＋0.20/－0
0.8＋0.20/－0
1.25＋0.20/－0
0.8＋0.20/－0
0.85±0.10
B
C
1.25＋0.20/－0
1.6±0.30
316
105
3.2±0.30
1.6±0.30
1.0＋0.20/－0
0.5＋0.20/－0
0.5＋0.20/－0
Note: P.6 Standard external dimensions
△= Blank space
⑥Temperature characteristics code
■High dielectric type（Excluding Super low distortion multilayer ceramic capacitor（CFCAPTM））
Applicable
standard
Temperature
range［℃］
Capacitance
tolerance
±10％
Tolerance
Code
Ref. Temp.［℃］
Capacitance change
±10％
code
K
JIS
B
－25～＋ 85
－55～＋ 85
－55～＋125
－55～＋105
－55～＋125
－55～＋ 85
20
25
25
25
25
25
±20％
M
BJ
±10％
K
EIA
EIA
EIA
EIA
EIA
X5R
X7R
X6S
X7S
X5R
±15％
±20％
M
±10％
K
B7
C6
±15％
±20％
M
±10％
K
±22％
±20％
M
±10％
K
C7
±22％
±20％
M
±10％
K
LD(※)
△F
±15％
±20％
M
JIS
EIA
F
－25～＋ 85
－30～＋ 85
20
25
＋30/－80％
＋22/－82％
＋80/－20％
＋80/－20％
Z
Z
Y5V
Note : ※.LD Low distortion high value multilayer ceramic capacitor
△= Blank space
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
4
■Temperature compensating type
Applicable
Temperature
range［℃］
Capacitance
tolerance
±0.1pF
±0.25pF
±0.5pF
±1pF
Tolerance
Code
Ref. Temp.［℃］
Capacitance change
0±60ppm/℃
standard
code
B
C
D
CG
CH
EIA
C0G
－55～＋125
25
F
±5％
J
±0.1pF
±0.25pF
±0.5pF
±1pF
B
JIS
EIA
CH
20
25
C
D
－55～＋125
0±60ppm/℃
F
C0H
±5％
J
±10％
K
JIS
EIA
JIS
EIA
JIS
CJ
C0J
CK
20
25
20
25
20
CJ
CK
－55～＋125
－55～＋125
0±120ppm/℃
0±250ppm/℃
±0.25pF
±0.25pF
C
C
C0J
UJ
±0.25pF
±0.5pF
±5％
C
D
J
UJ
－55～＋125
－750±120ppm/℃
EIA
U2J
25
JIS
EIA
JIS
UK
U2K
SL
－55～＋125
－55～＋125
－55～＋125
20
25
20
UK
SL
－750±250ppm/℃
±0.5pF
±5％
C
J
+350～－1000ppm/℃
⑥Series code
⑨Thickness
（Super low distortion multilayer ceramic capacitor（CFCAPTM）only）
Code
C
D
Thickness［mm］
0.2
Code
SD
Series code
Standard
P
0.3
0.45
0.5
⑦Nominal capacitance
T
Code
K
Nominal capacitance
（example）
V
0R5
0.5pF
1pF
W
A
010
0.8
100
10pF
D
0.85(212type or more)
101
100pF
1,000pF
10,000pF
0.1μF
1.0μF
10μF
100μF
F
1.15
1.25
1.6
102
G
L
103
104
N
1.9
105
Y
2.0 max
2.5
106
M
107
Note : R＝Decimal point
⑩Special code
Code
－
Special code
Standard
⑧Capacitance tolerance
Code
B
Capacitance tolerance
±0.1pF
⑪Packaging
Code
C
±0.25pF
±0.5pF
Packaging
D
F
T
φ178mm Taping （2mm pitch）
φ178mm Taping （4mm pitch）
F
±1pF
G
±2％
φ178mm Taping （4mm pitch, 1000 pcs/reel）
325 type（Thickness code M）
P
J
±5％
K
±10％
W
φ178mm Taping（1mm pitch）042type only
M
Z
±20％
＋80/－20％
⑫Internal code
Code
△
Internal code
Standard
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
5
Dimension [mm]
T
Type( EIA )
Ｌ
Ｗ
*1
C
D
C
P
T
e
□MK042（01005）
□VS042（01005）
□MK063（0201）
0.4±0.02
0.4±0.02
0.6±0.03
0.2±0.02
0.2±0.02
0.3±0.03
0.2±0.02
0.2±0.02
0.3±0.03
0.1±0.03
0.1±0.03
0.15±0.05
0.2±0.02
0.3±0.03
0.5±0.05
0.5±0.05
0.3±0.05
0.45±0.05
0.8±0.10
0.5±0.05
0.45±0.05
0.85±0.10
1.25±0.10
0.85±0.1
0.85±0.10
1.15±0.10
1.25±0.10
1.6±0.20
0.85±0.10
1.15±0.10
1.9±0.20
1.9+0.1/-0.2
2.5±0.20
2.5±0.20
C
P
V
W
P
K
□MK105（0402）
1.0±0.05
0.5±0.05
0.25±0.10
□VK105（0402）
1.0±0.05
0.5±0.05
1.0±0.05
0.25±0.10
0.18±0.08
□WK105（0204）※
0.52±0.05
□MK107（0603）
1.6±0.10
0.8±0.10
0.8±0.10
1.6±0.10
0.35±0.25
0.25±0.15
A
Ｖ
K
□WK107（0306）※
e
□MK212（0805）
2.0±0.10
1.25±0.10
2.0±0.15
D
G
Ｄ
D
Ｆ
G
L
0.5±0.25
0.3±0.2
※ LW reverse type
□WK212（0508）※
1.25±0.15
□MK316（1206）
3.2±0.15
1.6±0.15
0.5+0.35/-0.25
D
F
□MK325（1210）
□MK432（1812）
3.2±0.30
4.5±0.40
2.5±0.20
3.2±0.30
N
Y
0.6±0.3
0.9±0.6
M
M
Note : ※. LW reverse type, *1.Thickness code
■STANDARD QUANTITY
Dimension
Standard quantity［pcs］
Type
042
EIA（inch）
01005
［ｍｍ］
0.2
Code
C
D
P
Paper tape
Embossed tape
－
40000
063
0201
0402
0.3
15000
－
T
0.2
0.3
C
P
20000
15000
－
－
105
V
W
P
0.5
10000
－
0204 ※
0603
0.30
0.45
0.8
K
4000
－
－
4000
－
107
212
A
V
K
0306 ※
0.50
0.45
0.85
1.25
0.85
0.85
1.15
1.25
1.6
4000
0805
D
G
D
D
F
－
3000
－
0508 ※
4000
4000
－
316
1206
－
－
3000
2000
G
L
0.85
1.15
1.9
D
F
－
2000
325
432
1210
1812
N
Y
2.0 max
2.5
M
M
－
－
500（T），1000（P）
500
2.5
Note : ※.LW Reverse type（□WK）
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
6
■PARTS NUMBER
・ All the Multilayer Ceramic Capacitors of Catalog Lineup are Compliance RoHS.
・ Capacitance tolerance code is applied to [] of part number.
Note)
*1 We may provide X7R/X7S for some items according to the individual specification.
*2 The exchange of individual specification is necessary depending on the application and circuit condition. Please contact TAIYO YUDEN sales channels.
*3 The size standard should look at ④Dimension, ⑤Dimension tolerance, and ⑨Thickness, and P.6 Standard external dimensions.
Multilayer Ceramic Capacitors (High dielectric type)
●042TYPE
【Temperature Characteristic BJ : B/X5R】ꢀ0.2mm thickness（C）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
X5R*1
B
LMK042 BJ101[]C-W
LMK042 BJ151[]C-W
LMK042 BJ221[]C-W
LMK042 BJ331[]C-W
LMK042 BJ471[]C-W
LMK042 BJ681[]C-W
LMK042 BJ102[]C-W
LMK042 BJ152[]C-W
LMK042 BJ222[]C-W
LMK042 BJ332[]C-W
LMK042 BJ472[]C-W
LMK042 BJ682[]C-W
LMK042 BJ103[]C-W
JMK042 BJ152[]C-W
JMK042 BJ222[]C-W
JMK042 BJ332[]C-W
JMK042 BJ472[]C-W
JMK042 BJ682[]C-W
JMK042 BJ103[]C-W
JMK042 BJ223[]C-W
JMK042 BJ473[]C-W
AMK042 BJ473[]C-W
AMK042 BJ104[]C-W
100 p
150 p
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
5
200
200
200
200
200
200
200
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
X5R*1
B
5
X5R*1
B
220 p
5
X5R*1
B
330 p
5
X5R*1
B
470 p
5
X5R*1
B
680 p
5
X5R*1
10
B
1000 p
1500 p
2200 p
3300 p
4700 p
6800 p
10000 p
1500 p
2200 p
3300 p
4700 p
6800 p
10000 p
22000 p
47000 p
47000 p
0.1 μ
5
X5R
X5R
X5R
X5R
X5R
X5R
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
X5R*1
B
X5R*1
B
X5R*1
B
X5R*1
B
6.3
X5R*1
B
X5R*1
B
X5R
X5R
X5R
X5R
4
【Temperature Characteristic B7 : X7R】ꢀ0.2mm thickness（C）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
EMK042 B7101[]C-W
EMK042 B7151[]C-W
EMK042 B7221[]C-W
EMK042 B7331[]C-W
EMK042 B7471[]C-W
EMK042 B7681[]C-W
EMK042 B7102[]C-W
LMK042 B7101[]C-W
LMK042 B7151[]C-W
LMK042 B7221[]C-W
LMK042 B7331[]C-W
LMK042 B7471[]C-W
LMK042 B7681[]C-W
LMK042 B7102[]C-W
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
100 p
150 p
220 p
330 p
470 p
680 p
1000 p
100 p
150 p
220 p
330 p
470 p
680 p
1000 p
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
5
5
5
5
5
5
5
5
5
5
5
5
5
5
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
R
R
R
R
R
R
R
R
R
R
R
R
R
R
16
10
●063TYPE
【Temperature Characteristic BJ : B/X5R】ꢀ0.3mm thickness（P）
Soldering
R:Reflow
W:Wave
R
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
X5R*1
B
UMK063 BJ101[]P-F
UMK063 BJ151[]P-F
UMK063 BJ221[]P-F
UMK063 BJ331[]P-F
UMK063 BJ471[]P-F
UMK063 BJ681[]P-F
UMK063 BJ102[]P-F
UMK063 BJ152[]P-F
UMK063 BJ222[]P-F
UMK063 BJ332[]P-F
UMK063 BJ472[]P-F
UMK063 BJ682[]P-F
UMK063 BJ103[]P-F
TMK063 BJ152[]P-F
TMK063 BJ222[]P-F
TMK063 BJ332[]P-F
TMK063 BJ472[]P-F
TMK063 BJ682[]P-F
TMK063 BJ103[]P-F
TMK063 BJ223[]P-F
EMK063 BJ152[]P-F
EMK063 BJ222[]P-F
EMK063 BJ332[]P-F
EMK063 BJ472[]P-F
EMK063 BJ682[]P-F
EMK063 BJ103[]P-F
EMK063 BJ223[]P-F
EMK063 BJ333[]P-F
EMK063 BJ473[]P-F
EMK063 BJ683[]P-F
EMK063 BJ104[]P-F
EMK063 BJ224[]P-F
100 p
150 p
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
5
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
150
200
200
200
200
200
200
150
150
150
150
150
150
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
X5R*1
B
R
X5R*1
B
220 p
R
X5R*1
B
330 p
R
X5R*1
B
470 p
R
X5R*1
B
680 p
R
X5R*1
50
B
1000 p
1500 p
2200 p
3300 p
4700 p
6800 p
10000 p
1500 p
2200 p
3300 p
4700 p
6800 p
10000 p
22000 p
1500 p
2200 p
3300 p
4700 p
6800 p
10000 p
22000 p
33000 p
47000 p
68000 p
0.1 μ
R
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R
R
5
R
5
R
5
R
5
R
5
R
5
R
5
R
5
R
25
5
R
5
R
5
R
7.5
5
R
R
5
R
5
R
5
R
5
R
5
R
16
7.5
7.5
7.5
10
10
10
R
X5R
R
X5R
R
X5R
R
X5R
R
X5R
0.22 μ
R
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
7
■PARTS NUMBER
Part number 1
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 2
Rated voltage [V]
Rated voltage x ％
LMK063 BJ223[]P-F
LMK063 BJ333[]P-F
LMK063 BJ473[]P-F
LMK063 BJ683[]P-F
LMK063 BJ104[]P-F
LMK063 BJ224[]P-F
JMK063 BJ223[]P-F
JMK063 BJ333[]P-F
JMK063 BJ473[]P-F
JMK063 BJ683[]P-F
JMK063 BJ104[]P-F
JMK063 BJ224[]P-F
JMK063 BJ474[]P-F
JMK063ABJ105MP-F
AMK063 BJ224[]P-F
AMK063 BJ474MP-F
AMK063ABJ105MP-F
B
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
22000 p
33000 p
47000 p
68000 p
0.1 μ
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
7.5
7.5
7.5
10
10
10
7.5
7.5
7.5
10
10
10
10
10
10
10
10
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.05
0.3±0.03
0.3±0.03
0.3±0.05
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
10
0.22 μ
22000 p
33000 p
47000 p
68000 p
0.1 μ
B
6.3
0.22 μ
0.47 μ
1 μ
0.22 μ
0.47 μ
1 μ
±10，±20
±20
4
±20
【Temperature Characteristic C6 : X6S】ꢀ0.3mm thickness（P）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
LMK063 C6333[]P-F
LMK063 C6473[]P-F
LMK063 C6683[]P-F
LMK063 C6104[]P-F
LMK063 C6224[]P-F
JMK063 C6333[]P-F
JMK063 C6473[]P-F
JMK063 C6683[]P-F
JMK063 C6104[]P-F
JMK063 C6224[]P-F
AMK063 C6474MP-F
AMK063AC6105MP-F
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
33000 p
47000 p
68000 p
0.1 μ
0.22 μ
33000 p
47000 p
68000 p
0.1 μ
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
7.5
7.5
10
10
10
7.5
7.5
10
10
10
10
10
150
150
150
150
150
150
150
150
150
150
150
150
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.05
R
R
R
R
R
R
R
R
R
R
R
R
10
6.3
4
0.22 μ
0.47 μ
1 μ
±20
【Temperature Characteristic B7 : X7R】ꢀ0.3mm thickness（P）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
UMK063 B7101[]P-F
UMK063 B7151[]P-F
UMK063 B7221[]P-F
UMK063 B7331[]P-F
UMK063 B7471[]P-F
UMK063 B7681[]P-F
UMK063 B7102[]P-F
TMK063 B7152[]P-F
TMK063 B7222[]P-F
TMK063 B7332[]P-F
TMK063 B7472[]P-F
TMK063 B7682[]P-F
TMK063 B7103[]P-F
EMK063 B7152[]P-F
EMK063 B7222[]P-F
EMK063 B7332[]P-F
EMK063 B7472[]P-F
EMK063 B7682[]P-F
EMK063 B7103[]P-F
EMK063 B7223[]P-F
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
100 p
150 p
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
5
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
150
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
220 p
50
330 p
470 p
680 p
1000 p
1500 p
2200 p
3300 p
4700 p
6800 p
10000 p
1500 p
2200 p
3300 p
4700 p
6800 p
10000 p
22000 p
5
5
25
16
5
5
5
5
5
5
5
5
5
7.5
●105TYPE
【Temperature Characteristic BJ : B/X5R】ꢀ0.5mm thickness（V）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
X5R*1
B
UMK105 BJ221[]V-F
UMK105 BJ331[]V-F
UMK105 BJ471[]V-F
UMK105 BJ681[]V-F
UMK105 BJ102[]V-F
UMK105 BJ152[]V-F
UMK105 BJ222[]V-F
UMK105 BJ332[]V-F
UMK105 BJ472[]V-F
UMK105 BJ682[]V-F
UMK105 BJ103[]V-F
UMK105 BJ104[]V-F
UMK105 BJ224[]V-F
UMK105ABJ474[]V-F
GMK105 BJ104[]V-F
TMK105 BJ153[]V-F
TMK105 BJ223[]V-F
TMK105 BJ333[]V-F
TMK105 BJ473[]V-F
TMK105 BJ104[]V-F
ＴMK105 BJ224[]V-F
ＴMK105ABJ474[]V-F
TMK105 BJ105[]V-F
TMK105CBJ225MV-F
220 p
330 p
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.5
10
10
10
5
200
200
200
200
200
200
200
200
200
150
200
150
150
150
150
200
200
150
150
150
200
200
150
150
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.10
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.10
0.5±0.05
0.5+0.20/-0
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
X5R*1
B
X5R*1
B
470 p
X5R*1
B
680 p
X5R*1
B
1000 p
1500 p
2200 p
3300 p
4700 p
6800 p
10000 p
0.1 μ
X5R*1
B
X5R*1
B
50
X5R*1
B
X5R*1
B
X5R*1
B
X5R*1
B
X5R
X5R
X5R
0.22 μ
0.47 μ
0.1 μ
35
25
B
B
B
B
B
B
X5R
X5R*1
X5R*1
X5R*1
X5R*1
X5R
15000 p
22000 p
33000 p
47000 p
0.1 μ
3.5
3.5
3.5
3.5
5
X5R
0.22 μ
0.47 μ
1 μ
10
10
10
10
X5R
X5R
X5R
2.2 μ
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
8
■PARTS NUMBER
Part number 1
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 2
Rated voltage [V]
Rated voltage x ％
X5R*1
B
EMK105 BJ153[]V-F
EMK105 BJ223[]V-F
EMK105 BJ333[]V-F
EMK105 BJ473[]V-F
EMK105 BJ683[]V-F
EMK105 BJ104[]V-F
EMK105 BJ224[]V-F
EMK105ABJ474[]V-F
EMK105 BJ105[]V-F
EMK105ABJ225MV-F
LMK105 BJ104[]V-F
LMK105 BJ224[]V-F
LMK105 BJ474[]V-F
LMK105 BJ105[]V-F
LMK105 BJ225MV-F
LMK105BBJ475MVLF
JMK105 BJ224[]V-F
JMK105 BJ474[]V-F
JMK105 BJ105[]V-F
JMK105 BJ225MV-F
JMK105BBJ475MV-F
AMK105 BJ335MV-F
AMK105ABJ475MV-F
AMK105CBJ106MV-F
15000 p
22000 p
33000 p
47000 p
68000 p
0.1 μ
0.22 μ
0.47 μ
1 μ
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
3.5
3.5
3.5
3.5
5
200
200
200
200
200
150
150
150
150
150
200
150
150
150
150
150
150
150
150
150
150
150
150
150
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.10
0.5±0.05
0.5±0.10
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5+0.15/-0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5+0.15/-0.05
0.5±0.05
0.5±0.10
0.5+0.20/-0
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
X5R*1
B
X5R*1
B
X5R*1
B
B
B
B
X5R
16
X5R*1
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
5
5
10
10
10
5
2.2 μ
0.1 μ
0.22 μ
0.47 μ
1 μ
B
B
±10，±20
±10，±20
±10，±20
±10，±20
±20
5
10
10
10
10
5
10
2.2 μ
4.7 μ
0.22 μ
0.47 μ
1 μ
±20
B
±10，±20
±10，±20
±10，±20
±20
10
10
10
10
10
10
10
6.3
4
2.2 μ
4.7 μ
3.3 μ
4.7 μ
10 μ
JMK105 BJ475MV-FD
AMK105 BJ475MV-F
±20
±20
±20
±20
【Temperature Characteristic BJ : B/X5R】ꢀ0.3mm thickness（P）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
TMK105 BJ103[]P-F
TMK105 BJ104[]P-F
TMK105 BJ224[]P-F
TMK105 BJ474[]P-F
EMK105 BJ474[]P-F
LMK105 BJ105[]PLF
JMK105 BJ105[]P-F
AMK105 BJ225MP-F
B
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
10000 p
0.1 μ
0.22 μ
0.47 μ
0.47 μ
1 μ
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
5
150
150
150
150
150
150
150
150
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
R
R
R
R
R
R
R
R
10
10
10
10
10
10
10
25
16
10
6.3
4
1 μ
2.2 μ
【Temperature Characteristic BJ : X5R】ꢀ0.2mm thickness（C）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
LMK105 BJ104[]C-F
JMK105 BJ224[]C-F
JMK105 BJ474[]C-F
JMK105 BJ105MC-F
10
X5R
X5R
X5R
X5R
0.1 μ
0.22 μ
0.47 μ
1 μ
±10，±20
±10，±20
±10，±20
±20
10
10
10
10
150
150
150
150
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
R
R
R
R
6.3
【Temperature Characteristic C6 : X6S】ꢀ0.5mm thickness（V）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
16
Rated voltage x ％
EMK105 C6105[]V-F
EMK105CC6225MV-F
LMK105 C6105[]V-F
LMK105AC6225MV-F
JMK105 C6105[]V-F
JMK105 C6225MV-F
JMK105BC6475MV-F
AMK105BC6475MV-F
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
1 μ
2.2 μ
1 μ
±10，±20
±20
10
10
10
10
10
10
10
10
150
150
200
150
150
150
150
150
0.5±0.05
0.5+0.20/-0
0.5±0.05
R
R
R
R
R
R
R
R
±10，±20
±20
10
2.2 μ
1 μ
0.5±0.10
±10，±20
±20
0.5±0.05
6.3
4
2.2 μ
4.7 μ
4.7 μ
0.5±0.05
±20
0.5+0.15/-0.05
0.5+0.15/-0.05
±20
【Temperature Characteristic B7 : X7R】ꢀ0.5mm thickness（V）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
UMK105 B7221[]V-F
UMK105 B7331[]V-F
UMK105 B7471[]V-F
UMK105 B7681[]V-F
UMK105 B7102[]V-F
UMK105 B7152[]V-F
UMK105 B7222[]V-F
UMK105 B7332[]V-F
UMK105 B7472[]V-F
UMK105 B7682[]V-F
UMK105 B7103[]V-F
UMK105 B7104[]V-FR
TMK105 B7152[]V-F
TMK105 B7222[]V-F
TMK105 B7332[]V-F
TMK105 B7472[]V-F
TMK105 B7682[]V-F
TMK105 B7103[]V-F
TMK105 B7104[]V-FR
TMK105 B7224[]V-FR
EMK105 B7223[]V-F
EMK105 B7473[]V-F
EMK105 B7104[]V-F
EMK105 B7224[]V-FR
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
220 p
330 p
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.5
10
200
200
200
200
200
200
200
200
200
200
200
150
200
200
200
200
200
200
200
150
200
200
150
150
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
470 p
680 p
1000 p
1500 p
2200 p
3300 p
4700 p
6800 p
10000 p
0.1 μ
50
1500 p
2200 p
3300 p
4700 p
6800 p
10000 p
0.1 μ
2.5
2.5
2.5
2.5
2.5
3.5
10
25
16
0.22 μ
22000 p
47000 p
0.1 μ
10
3.5
3.5
5
0.22 μ
10
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
9
■PARTS NUMBER
Part number 1
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 2
Rated voltage [V]
Rated voltage x ％
LMK105 B7223[]V-F
LMK105 B7473[]V-F
LMK105 B7104[]V-F
LMK105 B7224[]V-FR
LMK105 B7474[]V-F
JMK105 B7224[]V-F
JMK105 B7474[]V-F
X7R
X7R
X7R
X7R
X7R
X7R
X7R
22000 p
47000 p
0.1 μ
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
5
200
200
150
150
150
150
150
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
10
0.22 μ
0.47 μ
0.22 μ
0.47 μ
10
10
5
6.3
10
【Temperature Characteristic F : F/Y5V】ꢀ0.5mm thickness（V）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
UMK105 F103ZV-F
TMK105 F223ZV-F
EMK105 F473ZV-F
EMK105 F104ZV-F
LMK105 F224ZV-F
JMK105 F474ZV-F
JMK105 F105ZV-F
50
25
F
F
F
F
F
F
F
Y5V
Y5V
Y5V
Y5V
Y5V
Y5V
Y5V
10000 p
22000 p
47000 p
0.1 μ
＋80/-20
＋80/-20
＋80/-20
＋80/-20
＋80/-20
＋80/-20
＋80/-20
5
5
200
200
200
200
200
200
150
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
7
16
10
9
0.22 μ
0.47 μ
1 μ
11
12.5
20
6.3
●107TYPE
【Temperature Characteristic BJ : B/X5R】ꢀ0.8mm thickness（A）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
UMK107ABJ474[]A-T
UMK107 BJ105[]A-T
UMK107BBJ225[]A-T
GMK107 BJ105[]A-T
TMK107 BJ224[]A-T
TMK107 BJ474[]A-T
TMK107 BJ105[]A-T
TMK107ABJ225[]A-T
EMK107 BJ224[]A-T
EMK107 BJ474[]A-T
EMK107 BJ105[]A-T
EMK107 BJ225[]A-T
EMK107ABJ475[]A-T
EMK107BBJ106MA-T
LMK107 BJ224[]A-T
LMK107 BJ474[]A-T
LMK107 BJ105[]A-T
LMK107 BJ225[]A-T
LMK107 BJ475[]A-T
LMK107BBJ106MALT
JMK107 BJ225[]A-T
JMK107 BJ475[]A-T
JMK107ABJ106MA-T
AMK107 BJ106MA-T
AMK107BBJ226MA-T
UMK107 BJ474[]A-TD
X5R
X5R
X5R
0.47 μ
1 μ
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
10
10
10
5
150
150
150
150
200
150
150
150
200
200
150
150
150
150
200
200
200
150
150
150
150
150
150
150
150
0.8+0.15/-0.05
0.8±0.10
R
R
50
35
2.2 μ
1 μ
0.8+0.20/-0
0.8±0.10
R
B
B
B
B
X5R
X5R
X5R
X5R
X5R
X5R*1
X5R*1
X5R*1
X5R
R
0.22 μ
0.47 μ
1 μ
3.5
3.5
5
0.8±0.10
R/W
R
0.8±0.10
25
0.8±0.10
R
TMK107 BJ225[]A-TD
EMK107 BJ475[]A-TD
2.2 μ
0.22 μ
0.47 μ
1 μ
10
3.5
3.5
5
0.8+0.15/-0.05
0.8±0.10
R
B
B
B
B
R/W
R
0.8±0.10
0.8±0.10
R
16
2.2 μ
4.7 μ
10 μ
0.22 μ
0.47 μ
1 μ
10
10
10
3.5
3.5
5
0.8±0.10
R
X5R
0.8+0.15/-0.05
0.8+0.20/-0
0.8±0.10
R
X5R
R
X5R*1
X5R*1
X5R*1
X5R
B
B
B
B
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
R/W
R
0.8±0.10
0.8±0.10
R
10
2.2 μ
4.7 μ
10 μ
2.2 μ
4.7 μ
10 μ
10 μ
22 μ
10
10
10
10
10
10
10
10
0.8±0.10
R
X5R
0.8±0.10
R
LMK107 BJ106MALTD
X5R
0.8+0.20/-0
0.8±0.10
R
B
X5R
±10，±20
±10，±20
±20
R
6.3
4
X5R
0.8±0.10
R
JMK107 BJ106MA-T
AMK107 BJ226MA-T
X5R
0.8+0.15/-0.05
0.8±0.10
R
X5R
±20
R
X5R
±20
0.8+0.20/-0
R
【Temperature Characteristic BJ : B/X5R】ꢀ0.45mm thickness（K）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
TMK107 BJ105[]K-T
EMK107 BJ105[]K-T
EMK107BBJ225[]K-T
LMK107 BJ105[]K-T
LMK107 BJ225[]K-T
LMK107BBJ475MKLT
JMK107 BJ105[]K-T
JMK107 BJ225[]K-T
JMK107 BJ475MK-T
JMK107BBJ106MK-T
AMK107BBJ106MK-T
25
16
X5R
X5R
X5R
1 μ
1 μ
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
10
10
10
10
10
10
10
10
10
10
10
150
150
150
150
150
150
150
150
150
150
150
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
R
R
R
R
R
R
R
R
R
R
R
2.2 μ
1 μ
B
B
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
10
2.2 μ
4.7 μ
1 μ
LMK107 BJ475MKLTD
±10，±20
±10，±20
±20
2.2 μ
4.7 μ
10 μ
10 μ
6.3
4
±20
±20
【Temperature Characteristic C6 : X6S】ꢀ0.8mm thickness（A）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
EMK107 C6105[]A-T
LMK107 C6105[]A-T
LMK107AC6475[]A-T
LMK107BC6106MA-T
JMK107 C6105[]A-T
JMK107 C6475[]A-T
JMK107BC6106MA-T
AMK107AC6106MA-T
16
10
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
1 μ
1 μ
±10，±20
±10，±20
±10，±20
±20
5
150
150
150
150
150
150
150
150
0.8±0.10
0.8±0.10
R
R
R
R
R
R
R
R
5
4.7 μ
10 μ
1 μ
10
10
5
0.8+0.15/-0.05
0.8+0.20/-0
0.8±0.10
±10，±20
±10，±20
±20
6.3
4
4.7 μ
10 μ
10 μ
10
10
10
0.8±0.10
0.8+0.20/-0
0.8+0.15/-0.05
±20
【Temperature Characteristic B7 : X7R】ꢀ0.8mm thickness（A）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
UMK107 B7224[]A-TR
UMK107 B7474[]A-TR
UMK107AB7105[]A-T
TMK107 B7474[]A-TR
TMK107 B7105[]A-T
X7R
X7R
X7R
X7R
X7R
0.22 μ
0.47 μ
1 μ
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
10
10
10
10
10
150
150
150
150
150
0.8±0.10
0.8±0.10
R
R
R
R
R
50
25
0.8+0.15/-0.05
0.8±0.10
0.47 μ
1 μ
0.8±0.10
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
10
■PARTS NUMBER
Part number 1
Soldering
R:Reflow
W:Wave
R/W
R
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 2
Rated voltage [V]
16
Rated voltage x ％
EMK107 B7224[]A-T
EMK107 B7474[]A-T
EMK107 B7105[]A-T
EMK107BB7225[]A-T
LMK107 B7224[]A-T
LMK107 B7474[]A-T
LMK107 B7105[]A-T
LMK107 B7225[]A-TR
JMK107 B7224[]A-T
JMK107 B7474[]A-T
JMK107 B7105[]A-T
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
0.22 μ
0.47 μ
1 μ
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
5
150
150
150
150
200
200
150
150
200
200
150
0.8±0.10
0.8±0.10
0.8±0.10
0.8+0.20/-0
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
R
2.2 μ
0.22 μ
0.47 μ
1 μ
10
3.5
3.5
5
R
R/W
R
10
R
2.2 μ
0.22 μ
0.47 μ
1 μ
10
3.5
3.5
5
R
R/W
R
6.3
R
【Temperature Characteristic F : F/Y5V】ꢀ0.8mm thickness（A）
Soldering
R:Reflow
W:Wave
R/W
R/W
R/W
R/W
R
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
UMK107 F104ZA-T
TMK107 F474ZA-T
EMK107 F224ZA-T
EMK107 F474ZA-T
EMK107 F105ZA-T
EMK107 F225ZA-T
LMK107 F105ZA-T
LMK107 F225ZA-T
50
25
F
F
F
F
F
F
F
F
Y5V
Y5V
Y5V
Y5V
Y5V
Y5V
Y5V
Y5V
0.1 μ
0.47 μ
0.22 μ
0.47 μ
1 μ
＋80/-20
＋80/-20
＋80/-20
＋80/-20
＋80/-20
＋80/-20
＋80/-20
＋80/-20
7
7
200
200
200
200
200
200
200
200
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
7
7
16
10
16
16
16
16
2.2 μ
1 μ
R
R
2.2 μ
R
●212TYPE
【Temperature Characteristic BJ : B/X5R】ꢀ1.25mm thickness（G）
Soldering
R:Reflow
W:Wave
R/W
R/W
R/W
R/W
R
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
X5R*1
B
UMK212 BJ104[]G-T
UMK212 BJ224[]G-T
UMK212 BJ474[]G-T
UMK212 BJ105[]G-T
UMK212ABJ225[]G-T
UMK212BBJ475[]G-T
TMK212 BJ225[]G-T
TMK212ABJ475[]G-T
TMK212BBJ106MG-T
EMK212 BJ225[]G-T
EMK212ABJ475[]G-T
EMK212ABJ106[]G-T
EMK212BBJ226MG-T
LMK212 BJ225[]G-T
LMK212ABJ475[]G-T
LMK212ABJ106[]G-T
LMK212BBJ226MG-T
JMK212ABJ475[]G-T
JMK212ABJ106[]G-T
JMK212ABJ226MG-T
JMK212BBJ476MG-T
0.1 μ
0.22 μ
0.47 μ
1 μ
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
3.5
3.5
3.5
5
200
200
150
150
150
150
150
150
150
200
150
150
150
200
200
200
150
200
200
150
150
1.25±0.10
1.25±0.10
X5R*1
B
X5R*1
B
1.25±0.10
50
B
B
X5R
X5R
X5R
X5R
X5R
X5R
1.25±0.10
2.2 μ
4.7 μ
2.2 μ
4.7 μ
10 μ
2.2 μ
4.7 μ
10 μ
22 μ
2.2 μ
4.7 μ
10 μ
22 μ
4.7 μ
10 μ
22 μ
47 μ
10
10
5
1.25+0.15/-0.05
1.25+0.20/-0
1.25±0.10
R
B
R
25
16
TMK212 BJ475[]G-T
10
10
5
1.25+0.15/-0.05
1.25+0.20/-0
1.25±0.10
R
R
X5R*1
X5R*1
X5R
B
B
±10，±20
±10，±20
±10，±20
±20
R
EMK212 BJ475[]G-T
EMK212 BJ106[]G-T
5
1.25+0.15/-0.05
1.25+0.15/-0.05
1.25+0.20/-0
1.25±0.10
R
10
10
5
R
X5R
R
X5R*1
X5R*1
X5R
B
B
±10，±20
±10，±20
±10，±20
±20
R
LMK212 BJ475[]G-T
LMK212 BJ106[]G-T
LMK212 BJ226MG-T
JMK212 BJ475[]G-T
JMK212 BJ106[]G-T
JMK212 BJ226MG-T
JMK212 BJ476MG-T
5
1.25+0.15/-0.05
1.25+0.15/-0.05
1.25+0.20/-0
1.25+0.15/-0.05
1.25+0.15/-0.05
1.25+0.15/-0.05
1.25+0.20/-0
R
10
10
10
5
R
X5R
R
B
X5R
±10，±20
±10，±20
±20
R
X5R*1
X5R
10
10
10
R
6.3
R
X5R
±20
R
【Temperature Characteristic BJ : B/X5R】ꢀ0.85mm thickness（D）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
50
Rated voltage x ％
UMK212ABJ105[]D-T
UMK212BBJ225[]D-T
TMK212 BJ474[]D-T
TMK212 BJ105[]D-T
TMK212ABJ225[]D-T
TMK212BBJ475[]D-T
EMK212 BJ105[]D-T
EMK212ABJ225[]D-T
EMK212 BJ475[]D-T
EMK212ABJ106[]D-T
LMK212 BJ105[]D-T
LMK212 BJ225[]D-T
LMK212 BJ475[]D-T
LMK212ABJ106[]D-T
LMK212BBJ226MD-T
JMK212 BJ475[]D-T
JMK212ABJ106[]D-T
JMK212ABJ226MD-T
AMK212BBJ476MD-T
UMK212 BJ105[]D-TD
X5R
X5R
1 μ
2.2 μ
0.47 μ
1 μ
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
10
10
3.5
5
150
150
200
200
150
150
200
150
150
150
200
200
200
150
150
200
200
150
150
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
B
B
B
X5R
X5R
X5R
X5R
X5R*1
X5R*1
X5R
25
16
TMK212 BJ225[]D-T
TMK212 BJ475[]D-TD
2.2 μ
4.7 μ
1 μ
5
10
5
B
B
B
EMK212 BJ225[]D-T
EMK212 BJ106[]D-TD
2.2 μ
4.7 μ
10 μ
1 μ
5
10
10
3.5
5
X5R
X5R*1
X5R*1
X5R
X5R
X5R
X5R
X5R
X5R
X5R
B
B
B
2.2 μ
4.7 μ
10 μ
22 μ
4.7 μ
10 μ
22 μ
47 μ
10
10
10
10
10
10
10
10
LMK212 BJ106[]D-T
±10，±20
±10，±20
±20
6.3
4
JMK212 BJ106[]D-T
JMK212 BJ226MD-T
±20
【Temperature Characteristic BJ : X5R】ꢀ0.45mm thickness（K）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
LMK212ABJ475[]K-T
JMK212ABJ475[]K-T
LMK212 BJ475[]K-T
JMK212 BJ475[]K-T
10
X5R
X5R
X5R
4.7 μ
4.7 μ
10 μ
±10，±20
±10，±20
±20
10
10
10
150
150
150
0.45±0.05
0.45±0.05
0.45±0.05
R
R
R
6.3
JMK212ABJ106MK-T *2 JMK212 BJ106MK-T
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
11
■PARTS NUMBER
【Temperature Characteristic C6 : X6S】ꢀ1.25mm thickness（G）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
LMK212BC6226MG-T
JMK212BC6226MG-T
AMK212AC6226MG-T
AMK212BC6476MG-T
10
6.3
X6S
X6S
X6S
X6S
22 μ
22 μ
22 μ
47 μ
±20
±20
±20
±20
10
10
10
10
150
150
150
150
1.25+0.20/-0
1.25+0.20/-0
1.25+0.15/-0.05
1.25+0.20/-0
R
R
R
R
4
【Temperature Characteristic C6 : X6S】ꢀ0.85mm thickness（D）
Soldering
R:Reflow
W:Wave
R
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
10
Rated voltage x ％
150
LMK212AC6106[]D-T
X6S
10 μ
±10，±20
10
0.85±0.10
【Temperature Characteristic B7 : X7R】ꢀ1.25mm thickness（G）
Soldering
R:Reflow
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
W:Wave
R/W
R/W
R/W
R/W
R
UMK212 B7104[]G-T
UMK212 B7224[]G-T
UMK212 B7474[]G-T
UMK212 B7105[]G-T
UMK212BB7225[]G-T
GMK212 B7105[]G-T
TMK212 B7105[]G-T
TMK212 B7225[]G-TR
TMK212AB7475[]G-T
EMK212 B7105[]G-T
EMK212 B7225[]G-T
EMK212 B7475[]G-T
EMK212BB7106MG-T
LMK212 B7105[]G-T
LMK212 B7225[]G-T
LMK212 B7475[]G-T
LMK212AB7106MG-T
JMK212AB7106[]G-T
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
0.1 μ
0.22 μ
0.47 μ
1 μ
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
3.5
3.5
3.5
10
10
3.5
3.5
10
10
3.5
10
10
10
3.5
5
200
150
150
150
150
150
150
150
150
200
150
150
150
200
200
150
150
150
1.25±0.10
1.25±0.10
50
1.25±0.10
1.25±0.10
2.2 μ
1 μ
1.25+0.20/-0
1.25±0.10
35
25
R/W
R
1 μ
1.25±0.10
2.2 μ
4.7 μ
1 μ
1.25±0.10
R
TMK212 B7475[]G-T
1.25+0.15/-0.05
1.25±0.10
R
R/W
R
2.2 μ
4.7 μ
10 μ
1 μ
1.25±0.10
16
1.25±0.10
R
1.25+0.20/-0
1.25±0.10
R
±10，±20
±10，±20
±10，±20
±20
R/W
R
2.2 μ
4.7 μ
10 μ
10 μ
1.25±0.10
10
10
10
10
1.25±0.10
R
LMK212 B7106MG-TD
JMK212 B7106[]G-T
1.25+0.15/-0.05
1.25+0.15/-0.05
R
6.3
±10，±20
R
【Temperature Characteristic B7 : X7R】ꢀ0.85mm thickness（D）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
UMK212AB7104[]D-T
UMK212AB7224[]D-T
UMK212AB7474[]D-T
UMK212AB7105[]D-T
TMK212AB7225[]D-TR
EMK212 B7474[]D-T
EMK212 B7105[]D-T
EMK212AB7225[]D-T
LMK212 B7105[]D-T
LMK212AB7225[]D-T
LMK212AB7475[]D-TR
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
0.1 μ
0.22 μ
0.47 μ
1 μ
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
10
10
10
10
10
3.5
5
150
150
150
150
150
200
200
150
200
200
150
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
R
R
50
R
R
25
16
2.2 μ
0.47 μ
1 μ
R
R/W
R
EMK212 B7225[]D-T
2.2 μ
1 μ
5
R
3.5
5
R
10
LMK212 B7225[]D-T
LMK212 B7475[]D-TR
2.2 μ
4.7 μ
R
R
10
【Temperature Characteristic F :F/Y5V】ꢀ1.25mm thickness（G）
Soldering
R:Reflow
W:Wave
R/W
R/W
R/W
R
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
UMK212 F474ZG-T
UMK212 F105ZG-T
EMK212 F225ZG-T
LMK212 F475ZG-T
LMK212 F106ZG-T
JMK212 F106ZG-T
F
F
F
F
F
F
Y5V
Y5V
Y5V
Y5V
Y5V
Y5V
0.47 μ
1 μ
＋80/-20
＋80/-20
＋80/-20
＋80/-20
＋80/-20
＋80/-20
7
7
200
200
200
200
200
200
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
50
16
10
6.3
2.2 μ
4.7 μ
10 μ
10 μ
7
9
16
16
R
R
【Temperature Characteristic F : F/Y5V】ꢀ0.85mm thickness（D）
Soldering
R:Reflow
W:Wave
R/W
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
UMK212 F224ZD-T
LMK212 F225ZD-T
JMK212 F475ZD-T
50
10
F
F
F
Y5V
Y5V
Y5V
0.22 μ
2.2 μ
4.7 μ
＋80/-20
＋80/-20
＋80/-20
7
9
200
200
200
0.85±0.10
0.85±0.10
0.85±0.10
R
6.3
16
R
●316TYPE
【Temperature Characteristic BJ : B/Y5R】ꢀ1.6mm thickness（D）
Soldering
R:Reflow
W:Wave
R
R
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
X5R*1
B
UMK316 BJ105[]L-T
UMK316 BJ225[]L-T
UMK316 BJ475[]L-T
UMK316BBJ106ML-T
TMK316 BJ225[]L-T
TMK316 BJ475[]L-T
TMK316 BJ106[]L-T
TMK316BBJ226ML-T
EMK316 BJ225[]L-T
EMK316 BJ475[]L-T
EMK316 BJ106[]L-T
EMK316ABJ226ML-T
LMK316 BJ106[]L-T
LMK316ABJ226[]Ｌ-T
LMK316ABJ476ML-T
1 μ
2.2 μ
4.7 μ
10 μ
2.2 μ
4.7 μ
10 μ
22 μ
2.2 μ
4.7 μ
10 μ
22 μ
10 μ
22 μ
47 μ
±10，±20
±10，±20
±10，±20
±20
3.5
10
10
10
3.5
5
200
150
150
150
200
150
150
150
200
200
150
150
200
150
150
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.30
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.30
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
X5R
X5R
X5R
50
R
R
X5R*1
B
±10，±20
±10，±20
±10，±20
±20
R
B
X5R
R
25
X5R*1
X5R
5
R
10
3.5
5
R
X5R*1
X5R
X5R*1
X5R
X5R*1
X5R
B
B
B
B
B
B
±10，±20
±10，±20
±10，±20
±20
R/W
R
16
10
5
R
EMK316 BJ226ML-T
10
5
R
±10，±20
±10，±20
±20
R
LMK316 BJ226[]L-T
LMK316 BJ476ML-T
10
10
R
X5R
R
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
12
■PARTS NUMBER
Part number 1
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 2
Rated voltage [V]
Rated voltage x ％
X5R*1
B
JMK316 BJ106[]L-T
JMK316ABJ226[]L-T
JMK316ABJ476ML-T
JMK316ABJ107ML-T
AMK316ABJ107ML-T
AMK316BBJ157ML-T
10 μ
22 μ
±10，±20
±10，±20
±20
5
200
200
200
150
150
150
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.30
R
R
R
R
R
R
JMK316 BJ226[]L-T
JMK316 BJ476ML-T
JMK316 BJ107ML-T
AMK316 BJ107ML-T
B
X5R
X5R
X5R
X5R
X5R
10
10
10
10
10
6.3
4
47 μ
100 μ
100 μ
150 μ
±20
±20
±20
【Temperature Characteristic BJ : B/Y5R】ꢀ0.85mm thickness（D）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
50
Rated voltage x ％
UMK316 BJ105[]D-T
UMK316 BJ225[]D-T
UMK316ABJ475[]D-T
TMK316 BJ105[]D-T
TMK316 BJ225[]D-T
TMK316 BJ475[]D-T
TMK316ABJ106[]D-T
EMK316 BJ225[]D-T
EMK316 BJ475[]D-T
EMK316 BJ106[]D-T
EMK316ABJ226MD-T
LMK316 BJ475[]D-T
LMK316 BJ106[]D-T
LMK316ABJ226MD-T
JMK316 BJ106[]D-T
JMK316ABJ226MD-T
JMK316ABJ476MD-T
B
B
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
1 μ
2.2 μ
4.7 μ
1 μ
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
3.5
3.5
10
3.5
3.5
5
150
150
150
200
150
150
150
200
200
150
150
200
200
150
200
150
150
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
UMK316 BJ475[]D-T
B
B
2.2 μ
4.7 μ
10 μ
2.2 μ
4.7 μ
10 μ
22 μ
4.7 μ
10 μ
22 μ
10 μ
22 μ
47 μ
25
16
TMK316 BJ106[]D-TD
10
3.5
5
B
B
10
10
5
EMK316 BJ226MD-T
LMK316 BJ226MD-T
B
B
±10，±20
±10，±20
±20
10
10
10
10
10
10
B
±10，±20
±20
6.3
JMK316 BJ226MD-T
JMK316 BJ476MD-T
±20
【Temperature Characteristic C7 : X7S】ꢀ1.6mm thickness（L）
Soldering
R:Reflow
W:Wave
R
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
4
Rated voltage x ％
150
AMK316AC7476ML-T
X7S
47 μ
±20
10
1.6±0.20
【Temperature Characteristic C6 : X6S】ꢀ1.6mm thickness（L）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
EMK316BC6226ML-T
JMK316AC6476ML-T
AMK316AC6476ML-T
AMK316AC6107ML-T
16
X6S
X6S
X6S
X6S
22 μ
47 μ
±20
±20
±20
±20
10
10
10
10
150
150
200
150
1.6±0.30
1.6±0.20
1.6±0.20
1.6±0.20
R
R
R
R
6.3
47 μ
4
100 μ
【Temperature Characteristic B7 : X7R】ꢀ1.6mm thickness（L）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
UMK316 B7224[]L-T
UMK316 B7474[]L-T
UMK316 B7105[]L-T
UMK316 B7225[]L-T
UMK316AB7475[]L-T
TMK316 B7105[]L-T
TMK316 B7225[]L-T
TMK316AB7475[]L-T
TMK316AB7106[]L-T
EMK316 B7225[]L-T
EMK316AB7106[]L-T
LMK316 B7225[]L-T
LMK316 B7475[]L-T
LMK316AB7106[]L-T
LMK316AB7226[]L-TR
JMK316 B7106[]L-T
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
0.22 μ
0.47 μ
1 μ
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
2.5
3.5
3.5
10
10
3.5
3.5
10
10
3.5
10
3.5
5
200
200
200
150
150
200
200
200
150
200
200
200
200
200
150
200
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
R/W
R/W
R
50
2.2 μ
4.7 μ
1 μ
R
UMK316 B7475[]L-T
R
R/W
R
2.2 μ
4.7 μ
10 μ
2.2 μ
10 μ
2.2 μ
4.7 μ
10 μ
22 μ
10 μ
25
16
TMK316 B7475[]L-T
TMK316 B7106[]L-TD
R
R
R/W
R
EMK316 B7106[]L-TD
R/W
R
10
LMK316 B7106[]L-TD
LMK316 B7226[]Ｌ-TD
10
10
5
R
R
6.3
R
【Temperature Characteristic B7 : X7R】ꢀ0.85mm thickness（D）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
UMK316 B7225[]D-T
TMK316AB7475[]D-T
LMK316AB7106MD-T
50
25
10
X7R
X7R
X7R
2.2 μ
4.7 μ
10 μ
±10，±20
±10，±20
±20
10
10
10
150
150
150
0.85±0.10
0.85±0.10
0.85±0.10
R
R
R
【Temperature Characteristic F : F/Y5V】ꢀ1.6mm thickness（L）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
GMK316 F106ZL-T
TMK316 F106ZL-T
EMK316 F106ZL-T
LMK316 F226ZL-T
35
25
16
10
F
F
F
F
Y5V
Y5V
Y5V
Y5V
10 μ
10 μ
10 μ
22 μ
＋80/-20
＋80/-20
＋80/-20
＋80/-20
9
9
200
200
200
200
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
R
R
R
R
9
16
【Temperature Characteristic F : F/Y5V】ꢀ1.25mm thickness（G）
Soldering
R:Reflow
W:Wave
R/W
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
UMK316 F225ZG-T
GMK316 F475ZG-T
50
35
F
F
Y5V
Y5V
2.2 μ
4.7 μ
＋80/-20
＋80/-20
7
7
200
200
1.25±0.10
1.25±0.10
R
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
13
■PARTS NUMBER
【Temperature Characteristic F : F/Y5V】ꢀ0.85mm thickness（D）
Soldering
R:Reflow
W:Wave
R
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
LMK316 F475ZD-T
JMK316 F106ZD-T
10
F
F
Y5V
Y5V
4.7 μ
10 μ
＋80/-20
＋80/-20
9
200
200
0.85±0.10
0.85±0.10
6.3
16
R
●325TYPE
【Temperature Characteristic BJ : B/X5R】ꢀ2.5mm thickness（M）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
UMK325 BJ475[]M-T
UMK325 BJ106[]M-T
GMK325 BJ226MM-T
TMK325 BJ106[]M-T
TMK325 BJ226[]M-T
TMK325ABJ476MM-T
EMK325 BJ226[]M-T
EMK325 BJ476MM-T
LMK325 BJ226[]M-T
LMK325 BJ476MM-T
LMK325ABJ107MM-T
JMK325 BJ476MM-T
JMK325ABJ107MM-T
JMK325ABJ227MM-T
AMK325ABJ227MM-T
X5R
X5R
X5R
4.7 μ
10 μ
22 μ
10 μ
22 μ
47 μ
22 μ
47 μ
22 μ
47 μ
100 μ
47 μ
100 μ
220 μ
220 μ
±10，±20
±10，±20
±20
5
5
150
150
150
150
150
150
150
150
200
150
150
150
150
150
150
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.30
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.30
2.5±0.20
2.5±0.30
2.5±0.30
2.5±0.30
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
50
35
10
3.5
5
X5R*1
B
±10，±20
±10，±20
±20
25
16
10
X5R
X5R
10
5
B
B
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
±10，±20
±20
10
5
±10，±20
±20
10
10
10
10
10
10
LMK325 BJ107MM-T
JMK325 BJ107MM-T
±20
±20
6.3
4
±20
±20
±20
【Temperature Characteristic BJ : B/X5R】ꢀ1.9mm thickness（Y,N）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
UMK325 BJ475[]N-T
GMK325 BJ225MN-T
GMK325 BJ475[]N-T
GMK325 BJ106[]N-T
TMK325 BJ335MN-T
TMK325 BJ475[]N-T
TMK325 BJ106[]N-T
EMK325 BJ475[]N-T
EMK325 BJ106[]N-T
EMK325 BJ476MY-T
LMK325 BJ226MY-T
LMK325 BJ106[]N-T
JMK325 BJ226MY-T
JMK325 BJ107MY-T
JMK325 BJ476MN-T
50
35
X5R
4.7 μ
2.2 μ
4.7 μ
10 μ
3.3 μ
4.7 μ
10 μ
4.7 μ
10 μ
47 μ
22 μ
10 μ
22 μ
100 μ
47 μ
±10，±20
±20
10
3.5
10
5
150
200
150
150
200
200
200
200
200
150
150
200
200
150
150
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9+0.1/-0.2
1.9+0.1/-0.2
1.9±0.20
1.9+0.1/-0.2
1.9+0.1/-0.2
1.9±0.20
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
B
X5R
X5R
X5R
X5R*1
X5R*1
X5R
X5R*1
X5R
X5R
X5R
X5R
X5R
X5R
X5R
±10，±20
±10，±20
±20
B
B
B
B
B
B
3.5
3.5
5
25
±10，±20
±10，±20
±10，±20
±10，±20
±20
3.5
3.5
10
5
16
10
B
B
B
±20
±10，±20
±20
3.5
5
6.3
±20
10
10
±20
【Temperature Characteristic BJ : B/X5R】ꢀ0.85mm thickness（D）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
TMK325 BJ106[]D-T
EMK325 BJ106[]D-T
EMK325 BJ226MD-T
LMK325 BJ335[]D-T
LMK325 BJ475[]D-T
LMK325 BJ106[]D-T
25
16
B
B
B
B
B
B
X5R
X5R
X5R
X5R
X5R
X5R
10 μ
10 μ
22 μ
3.3 μ
4.7 μ
10 μ
±10，±20
±10，±20
±20
5
5
150
150
150
200
200
150
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
R
R
R
R
R
R
10
3.5
5
±10，±20
±10，±20
±10，±20
10
5
【Temperature Characteristic C7 : X7S】ꢀ2.5mm thickness（M）
Soldering
R:Reflow
W:Wave
R
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
6.3
Rated voltage x ％
150
JMK325AC7107MM-T
X7S
100 μ
±20
10
2.5±0.30
【Temperature Characteristic C6 : X6S】ꢀ2.5mm thickness（M）
Soldering
R:Reflow
W:Wave
R
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
EMK325AC6476MM-T
JMK325AC6107MM-T
16
6.3
X6S
X6S
47 μ
100 μ
±20
±20
10
10
150
150
2.5±0.30
2.5±0.30
R
【Temperature Characteristic B7 : X7R】ꢀ2.5mm thickness（M）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
UMK325 B7475[]M-T
UMK325AB7106[]M-T
TMK325AB7106[]M-T
TMK325 B7226[]M-TR
EMK325 B7226[]M-TR
LMK325 B7476[]M-TR
JMK325 B7476[]M-TR
X7R
X7R
X7R
X7R
X7R
X7R
X7R
4.7 μ
10 μ
10 μ
22 μ
22 μ
47 μ
47 μ
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
5
150
150
150
150
150
150
200
2.5±0.20
2.5±0.30
2.5±0.30
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
R
R
R
R
R
R
R
50
25
10
10
10
10
10
10
16
10
6.3
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
14
■PARTS NUMBER
【Temperature Characteristic B7 : X7R】ꢀ1.9mm thickness（N）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
UMK325 B7475[]N-TR
TMK325 B7335[]N-T
TMK325 B7475[]N-T
TMK325 B7106[]N-TR
EMK325 B7475[]N-T
EMK325 B7106[]N-T
LMK325 B7106[]N-T
50
25
X7R
X7R
X7R
X7R
X7R
X7R
X7R
4.7 μ
3.3 μ
4.7 μ
10 μ
4.7 μ
10 μ
10 μ
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
10
3.5
3.5
10
150
200
150
150
200
150
200
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
R
R
R
R
R
R
R
3.5
3.5
3.5
16
10
【Temperature Characteristic F : F/Y5V】ꢀ1.9mm thickness（N）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
EMK325 F226ZN-T
LMK325 F226ZN-T
JMK325 F476ZN-T
16
10
F
F
F
Y5V
Y5V
Y5V
22 μ
22 μ
47 μ
＋80/-20
＋80/-20
＋80/-20
16
16
16
200
200
200
1.9±0.20
1.9±0.20
1.9±0.20
R
R
R
6.3
Multilayer Ceramic Capacitors（Temperature compensating type）
●042TYPE
【Temperature Characteristic CG : CG/C0G】ꢀ0.2mm thickness（C,D）
Q
(at 1MHz)
min
408
410
412
414
415
416
418
420
422
424
426
428
430
432
434
436
438
440
442
444
446
448
450
452
454
456
458
460
462
464
466
468
470
472
474
476
478
480
482
484
486
488
490
492
494
496
498
500
502
504
506
508
510
512
514
516
518
520
522
524
526
528
530
532
534
Soldering
R:Reflow
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
EMK042 CG0R4[]D-W
EMK042 CG0R5[]D-W
EMK042 CG0R6[]D-W
EMK042 CG0R7[]D-W
EMK042 CGR75[]D-W
EMK042 CG0R8[]D-W
EMK042 CG0R9[]D-W
EMK042 CG010[]D-W
EMK042 CG1R1[]D-W
EMK042 CG1R2[]D-W
EMK042 CG1R3[]D-W
EMK042 CG1R4[]D-W
EMK042 CG1R5[]D-W
EMK042 CG1R6[]D-W
EMK042 CG1R7[]D-W
EMK042 CG1R8[]D-W
EMK042 CG1R9[]D-W
EMK042 CG020[]D-W
EMK042 CG2R1[]D-W
EMK042 CG2R2[]D-W
EMK042 CG2R3[]D-W
EMK042 CG2R4[]D-W
EMK042 CG2R5[]D-W
EMK042 CG2R6[]D-W
EMK042 CG2R7[]D-W
EMK042 CG2R8[]D-W
EMK042 CG2R9[]D-W
EMK042 CG030[]D-W
EMK042 CG3R1[]D-W
EMK042 CG3R2[]D-W
EMK042 CG3R3[]D-W
EMK042 CG3R4[]D-W
EMK042 CG3R5[]D-W
EMK042 CG3R6[]D-W
EMK042 CG3R7[]D-W
EMK042 CG3R8[]D-W
EMK042 CG3R9[]D-W
EMK042 CG040[]D-W
EMK042 CG4R1[]D-W
EMK042 CG4R2[]D-W
EMK042 CG4R3[]D-W
EMK042 CG4R4[]D-W
EMK042 CG4R5[]D-W
EMK042 CG4R6[]D-W
EMK042 CG4R7[]D-W
EMK042 CG4R8[]D-W
EMK042 CG4R9[]D-W
EMK042 CG050[]D-W
EMK042 CG5R1DD-W
EMK042 CG5R2DD-W
EMK042 CG5R3DD-W
EMK042 CG5R4DD-W
EMK042 CG5R5DD-W
EMK042 CG5R6DD-W
EMK042 CG5R7DD-W
EMK042 CG5R8DD-W
EMK042 CG5R9DD-W
EMK042 CG060DD-W
EMK042 CG6R1DD-W
EMK042 CG6R2DD-W
EMK042 CG6R3DD-W
EMK042 CG6R4DD-W
EMK042 CG6R5DD-W
EMK042 CG6R6DD-W
EMK042 CG6R7DD-W
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
0.4 p
0.5 p
0.6 p
0.7 p
0.75 p
0.8 p
0.9 p
1 p
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.5pF
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
1.1 p
1.2 p
1.3 p
1.4 p
1.5 p
1.6 p
1.7 p
1.8 p
1.9 p
2 p
2.1 p
2.2 p
2.3 p
2.4 p
2.5 p
2.6 p
2.7 p
2.8 p
2.9 p
3 p
3.1 p
3.2 p
3.3 p
3.4 p
3.5 p
3.6 p
3.7 p
3.8 p
3.9 p
4 p
16
4.1 p
4.2 p
4.3 p
4.4 p
4.5 p
4.6 p
4.7 p
4.8 p
4.9 p
5 p
5.1 p
5.2 p
5.3 p
5.4 p
5.5 p
5.6 p
5.7 p
5.8 p
5.9 p
6 p
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
6.1 p
6.2 p
6.3 p
6.4 p
6.5 p
6.6 p
6.7 p
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
15
■PARTS NUMBER
Part number 1
Q
(at 1MHz)
min
Soldering
R:Reflow
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
Part number 2
Rated voltage [V]
Rated voltage x ％
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
EMK042 CG6R8DD-W
EMK042 CG6R9DD-W
EMK042 CG070DD-W
EMK042 CG7R1DD-W
EMK042 CG7R2DD-W
EMK042 CG7R3DD-W
EMK042 CG7R4DD-W
EMK042 CG7R5DD-W
EMK042 CG7R6DD-W
EMK042 CG7R7DD-W
EMK042 CG7R8DD-W
EMK042 CG7R9DD-W
EMK042 CG080DD-W
EMK042 CG8R1DD-W
EMK042 CG8R2DD-W
EMK042 CG8R3DD-W
EMK042 CG8R4DD-W
EMK042 CG8R5DD-W
EMK042 CG8R6DD-W
EMK042 CG8R7DD-W
EMK042 CG8R8DD-W
EMK042 CG8R9DD-W
EMK042 CG090DD-W
EMK042 CG9R1DD-W
EMK042 CG9R2DD-W
EMK042 CG9R3DD-W
EMK042 CG9R4DD-W
EMK042 CG9R5DD-W
EMK042 CG9R6DD-W
EMK042 CG9R7DD-W
EMK042 CG9R8DD-W
EMK042 CG9R9DD-W
EMK042 CG100DD-W
EMK042 CG110JD-W
EMK042 CG120JD-W
EMK042 CG130JD-W
EMK042 CG150JD-W
EMK042 CG160JC-W
EMK042 CG180JC-W
EMK042 CG200JC-W
EMK042 CG220JC-W
EMK042 CG240JC-W
EMK042 CG270JC-W
EMK042 CG300JC-W
EMK042 CG330JC-W
EMK042 CG360JC-W
EMK042 CG390JC-W
EMK042 CG430JC-W
EMK042 CG470JC-W
EMK042 CG510JC-W
EMK042 CG560JC-W
EMK042 CG620JC-W
EMK042 CG680JC-W
EMK042 CG750JC-W
EMK042 CG820JC-W
EMK042 CG910JC-W
EMK042 CG101JC-W
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
6.8 p
6.9 p
7 p
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5％
536
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
538
540
7.1 p
7.2 p
7.3 p
7.4 p
7.5 p
7.6 p
7.7 p
7.8 p
7.9 p
8 p
542
544
546
548
550
552
554
556
558
560
8.1 p
8.2 p
8.3 p
8.4 p
8.5 p
8.6 p
8.7 p
8.8 p
8.9 p
9 p
562
564
566
568
570
572
574
576
578
580
9.1 p
9.2 p
9.3 p
9.4 p
9.5 p
9.6 p
9.7 p
9.8 p
9.9 p
10 p
11 p
12 p
13 p
15 p
16 p
18 p
20 p
22 p
24 p
27 p
30 p
33 p
36 p
39 p
43 p
47 p
51 p
56 p
62 p
68 p
75 p
82 p
91 p
100 p
582
584
586
588
590
16
592
594
596
598
600
620
±5％
640
±5％
660
±5％
700
±5％
720
±5％
760
±5％
800
±5％
840
±5％
880
±5％
940
±5％
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
【Temperature Characteristic C△ : C△/C0△】ꢀ0.2mm thickness（C,D）
Q
(at 1MHz)
min
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
EMK042 CK0R4[]D-W
EMK042 CK0R5[]D-W
EMK042 CK0R6[]D-W
EMK042 CK0R7[]D-W
EMK042 CKR75[]D-W
EMK042 CK0R8[]D-W
EMK042 CK0R9[]D-W
EMK042 CK010[]D-W
EMK042 CK1R1[]D-W
EMK042 CK1R2[]D-W
EMK042 CK1R3[]D-W
EMK042 CK1R4[]D-W
EMK042 CK1R5[]D-W
EMK042 CK1R6[]D-W
EMK042 CK1R7[]D-W
EMK042 CK1R8[]D-W
EMK042 CK1R9[]D-W
EMK042 CK020[]D-W
EMK042 CK2R1[]D-W
EMK042 CK2R2[]D-W
EMK042 CK2R3[]D-W
EMK042 CK2R4[]D-W
EMK042 CK2R5[]D-W
EMK042 CK2R6[]D-W
EMK042 CK2R7[]D-W
EMK042 CK2R8[]D-W
EMK042 CK2R9[]D-W
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
0.4 p
0.5 p
0.6 p
0.7 p
0.75 p
0.8 p
0.9 p
1 p
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
408
410
412
414
415
416
418
420
422
424
426
428
430
432
434
436
438
440
442
444
446
448
450
452
454
456
458
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
1.1 p
1.2 p
1.3 p
1.4 p
1.5 p
1.6 p
1.7 p
1.8 p
1.9 p
2 p
16
2.1 p
2.2 p
2.3 p
2.4 p
2.5 p
2.6 p
2.7 p
2.8 p
2.9 p
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
16
■PARTS NUMBER
Part number 1
Q
(at 1MHz)
min
460
462
464
466
468
470
472
474
476
478
480
482
484
486
488
490
492
494
496
498
500
502
504
506
508
510
512
514
516
518
520
522
524
526
528
530
532
534
536
538
540
542
544
546
548
550
552
554
556
558
560
562
564
566
568
570
572
574
576
578
580
582
584
586
588
590
592
594
596
598
600
620
640
660
700
720
760
800
840
880
940
1000
1000
1000
1000
1000
1000
1000
Soldering
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
Part number 2
Rated voltage [V]
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Rated voltage x ％
EMK042 CJ030[]D-W
EMK042 CJ3R1[]D-W
EMK042 CJ3R2[]D-W
EMK042 CJ3R3[]D-W
EMK042 CJ3R4[]D-W
EMK042 CJ3R5[]D-W
EMK042 CJ3R6[]D-W
EMK042 CJ3R7[]D-W
EMK042 CJ3R8[]D-W
EMK042 CJ3R9[]D-W
EMK042 CH040[]D-W
EMK042 CH4R1[]D-W
EMK042 CH4R2[]D-W
EMK042 CH4R3[]D-W
EMK042 CH4R4[]D-W
EMK042 CH4R5[]D-W
EMK042 CH4R6[]D-W
EMK042 CH4R7[]D-W
EMK042 CH4R8[]D-W
EMK042 CH4R9[]D-W
EMK042 CH050[]D-W
EMK042 CH5R1DD-W
EMK042 CH5R2DD-W
EMK042 CH5R3DD-W
EMK042 CH5R4DD-W
EMK042 CH5R5DD-W
EMK042 CH5R6DD-W
EMK042 CH5R7DD-W
EMK042 CH5R8DD-W
EMK042 CH5R9DD-W
EMK042 CH060DD-W
EMK042 CH6R1DD-W
EMK042 CH6R2DD-W
EMK042 CH6R3DD-W
EMK042 CH6R4DD-W
EMK042 CH6R5DD-W
EMK042 CH6R6DD-W
EMK042 CH6R7DD-W
EMK042 CH6R8DD-W
EMK042 CH6R9DD-W
EMK042 CH070DD-W
EMK042 CH7R1DD-W
EMK042 CH7R2DD-W
EMK042 CH7R3DD-W
EMK042 CH7R4DD-W
EMK042 CH7R5DD-W
EMK042 CH7R6DD-W
EMK042 CH7R7DD-W
EMK042 CH7R8DD-W
EMK042 CH7R9DD-W
EMK042 CH080DD-W
EMK042 CH8R1DD-W
EMK042 CH8R2DD-W
EMK042 CH8R3DD-W
EMK042 CH8R4DD-W
EMK042 CH8R5DD-W
EMK042 CH8R6DD-W
EMK042 CH8R7DD-W
EMK042 CH8R8DD-W
EMK042 CH8R9DD-W
EMK042 CH090DD-W
EMK042 CH9R1DD-W
EMK042 CH9R2DD-W
EMK042 CH9R3DD-W
EMK042 CH9R4DD-W
EMK042 CH9R5DD-W
EMK042 CH9R6DD-W
EMK042 CH9R7DD-W
EMK042 CH9R8DD-W
EMK042 CH9R9DD-W
EMK042 CH100DD-W
EMK042 CH110JD-W
EMK042 CH120JD-W
EMK042 CH130JD-W
EMK042 CH150JD-W
EMK042 CH160JC-W
EMK042 CH180JC-W
EMK042 CH200JC-W
EMK042 CH220JC-W
EMK042 CH240JC-W
EMK042 CH270JC-W
EMK042 CH300JC-W
EMK042 CH330JC-W
EMK042 CH360JC-W
EMK042 CH390JC-W
EMK042 CH430JC-W
EMK042 CH470JC-W
EMK042 CH510JC-W
CJ
CJ
CJ
CJ
CJ
CJ
CJ
CJ
CJ
CJ
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
C0J
C0J
C0J
C0J
C0J
C0J
C0J
C0J
C0J
C0J
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
3 p
3.1 p
3.2 p
3.3 p
3.4 p
3.5 p
3.6 p
3.7 p
3.8 p
3.9 p
4 p
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.5pF
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
4.1 p
4.2 p
4.3 p
4.4 p
4.5 p
4.6 p
4.7 p
4.8 p
4.9 p
5 p
5.1 p
5.2 p
5.3 p
5.4 p
5.5 p
5.6 p
5.7 p
5.8 p
5.9 p
6 p
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
6.1 p
6.2 p
6.3 p
6.4 p
6.5 p
6.6 p
6.7 p
6.8 p
6.9 p
7 p
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
7.1 p
7.2 p
7.3 p
7.4 p
7.5 p
7.6 p
7.7 p
7.8 p
7.9 p
8 p
±0.5pF
±0.5pF
±0.5pF
16
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
8.1 p
8.2 p
8.3 p
8.4 p
8.5 p
8.6 p
8.7 p
8.8 p
8.9 p
9 p
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
9.1 p
9.2 p
9.3 p
9.4 p
9.5 p
9.6 p
9.7 p
9.8 p
9.9 p
10 p
11 p
12 p
13 p
15 p
16 p
18 p
20 p
22 p
24 p
27 p
30 p
33 p
36 p
39 p
43 p
47 p
51 p
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
17
■PARTS NUMBER
Part number 1
Q
(at 1MHz)
min
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
Part number 2
Rated voltage [V]
Rated voltage x ％
EMK042 CH560JC-W
EMK042 CH620JC-W
EMK042 CH680JC-W
EMK042 CH750JC-W
EMK042 CH820JC-W
EMK042 CH910JC-W
EMK042 CH101JC-W
CH
CH
CH
CH
CH
CH
CH
C0H
C0H
C0H
C0H
C0H
C0H
C0H
56 p
62 p
68 p
75 p
82 p
91 p
100 p
±5％
±5％
±5％
±5％
±5％
±5％
±5％
1000
200
200
200
200
200
200
200
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
R
R
R
R
R
R
R
1000
1000
16
1000
1000
1000
1000
●063TYPE
【Temperature Characteristic CG : CG/C0G】ꢀ0.3mm thickness（T）
Q
(at 1MHz)
min
404
406
408
410
412
414
415
416
418
420
422
424
426
428
430
432
434
436
438
440
442
444
446
448
450
452
454
456
458
460
462
464
466
468
470
472
474
476
478
480
482
484
486
488
490
492
494
496
498
500
502
504
506
508
510
512
514
516
518
520
522
524
526
528
530
532
534
536
538
540
542
544
546
548
550
552
Soldering
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
Part number 1
Part number 2
Rated voltage [V]
R:Reflow
W:Wave
R
Rated voltage x ％
UMK063 CG0R2CT-F
UMK063 CG0R3CT-F
UMK063 CG0R4CT-F
UMK063 CG0R5CT-F
UMK063 CG0R6CT-F
UMK063 CG0R7CT-F
UMK063 CGR75CT-F
UMK063 CG0R8CT-F
UMK063 CG0R9CT-F
UMK063 CG010CT-F
UMK063 CG1R1CT-F
UMK063 CG1R2CT-F
UMK063 CG1R3CT-F
UMK063 CG1R4CT-F
UMK063 CG1R5CT-F
UMK063 CG1R6CT-F
UMK063 CG1R7CT-F
UMK063 CG1R8CT-F
UMK063 CG1R9CT-F
UMK063 CG020CT-F
UMK063 CG2R1CT-F
UMK063 CG2R2CT-F
UMK063 CG2R3CT-F
UMK063 CG2R4CT-F
UMK063 CG2R5CT-F
UMK063 CG2R6CT-F
UMK063 CG2R7CT-F
UMK063 CG2R8CT-F
UMK063 CG2R9CT-F
UMK063 CG030CT-F
UMK063 CG3R1CT-F
UMK063 CG3R2CT-F
UMK063 CG3R3CT-F
UMK063 CG3R4CT-F
UMK063 CG3R5CT-F
UMK063 CG3R6CT-F
UMK063 CG3R7CT-F
UMK063 CG3R8CT-F
UMK063 CG3R9CT-F
UMK063 CG040CT-F
UMK063 CG4R1CT-F
UMK063 CG4R2CT-F
UMK063 CG4R3CT-F
UMK063 CG4R4CT-F
UMK063 CG4R5CT-F
UMK063 CG4R6CT-F
UMK063 CG4R7CT-F
UMK063 CG4R8CT-F
UMK063 CG4R9CT-F
UMK063 CG050CT-F
UMK063 CG5R1DT-F
UMK063 CG5R2DT-F
UMK063 CG5R3DT-F
UMK063 CG5R4DT-F
UMK063 CG5R5DT-F
UMK063 CG5R6DT-F
UMK063 CG5R7DT-F
UMK063 CG5R8DT-F
UMK063 CG5R9DT-F
UMK063 CG060DT-F
UMK063 CG6R1DT-F
UMK063 CG6R2DT-F
UMK063 CG6R3DT-F
UMK063 CG6R4DT-F
UMK063 CG6R5DT-F
UMK063 CG6R6DT-F
UMK063 CG6R7DT-F
UMK063 CG6R8DT-F
UMK063 CG6R9DT-F
UMK063 CG070DT-F
UMK063 CG7R1DT-F
UMK063 CG7R2DT-F
UMK063 CG7R3DT-F
UMK063 CG7R4DT-F
UMK063 CG7R5DT-F
UMK063 CG7R6DT-F
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
0.2 p
0.3 p
0.4 p
0.5 p
0.6 p
0.7 p
0.75 p
0.8 p
0.9 p
1 p
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
R
R
R
R
R
R
R
R
R
1.1 p
1.2 p
1.3 p
1.4 p
1.5 p
1.6 p
1.7 p
1.8 p
1.9 p
2 p
R
R
R
R
R
R
R
R
R
R
2.1 p
2.2 p
2.3 p
2.4 p
2.5 p
2.6 p
2.7 p
2.8 p
2.9 p
3 p
R
R
R
R
R
R
R
R
R
R
3.1 p
3.2 p
3.3 p
3.4 p
3.5 p
3.6 p
3.7 p
3.8 p
3.9 p
4 p
R
R
R
R
R
R
R
R
50
R
R
4.1 p
4.2 p
4.3 p
4.4 p
4.5 p
4.6 p
4.7 p
4.8 p
4.9 p
5 p
R
R
R
R
R
R
R
R
R
R
5.1 p
5.2 p
5.3 p
5.4 p
5.5 p
5.6 p
5.7 p
5.8 p
5.9 p
6 p
R
±0.5pF
R
±0.5pF
R
±0.5pF
R
±0.5pF
R
±0.5pF
R
±0.5pF
R
±0.5pF
R
±0.5pF
R
±0.5pF
R
6.1 p
6.2 p
6.3 p
6.4 p
6.5 p
6.6 p
6.7 p
6.8 p
6.9 p
7 p
±0.5pF
R
±0.5pF
R
±0.5pF
R
±0.5pF
R
±0.5pF
R
±0.5pF
R
±0.5pF
R
±0.5pF
R
±0.5pF
R
±0.5pF
R
7.1 p
7.2 p
7.3 p
7.4 p
7.5 p
7.6 p
±0.5pF
R
±0.5pF
R
±0.5pF
R
±0.5pF
R
±0.5pF
R
±0.5pF
R
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
18
■PARTS NUMBER
Part number 1
Q
(at 1MHz)
min
Soldering
R:Reflow
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
Part number 2
Rated voltage [V]
Rated voltage x ％
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
UMK063 CG7R7DT-F
UMK063 CG7R8DT-F
UMK063 CG7R9DT-F
UMK063 CG080DT-F
UMK063 CG8R1DT-F
UMK063 CG8R2DT-F
UMK063 CG8R3DT-F
UMK063 CG8R4DT-F
UMK063 CG8R5DT-F
UMK063 CG8R6DT-F
UMK063 CG8R7DT-F
UMK063 CG8R8DT-F
UMK063 CG8R9DT-F
UMK063 CG090DT-F
UMK063 CG9R1DT-F
UMK063 CG9R2DT-F
UMK063 CG9R3DT-F
UMK063 CG9R4DT-F
UMK063 CG9R5DT-F
UMK063 CG9R6DT-F
UMK063 CG9R7DT-F
UMK063 CG9R8DT-F
UMK063 CG9R9DT-F
UMK063 CG100DT-F
UMK063 CG110JT-F
UMK063 CG120JT-F
UMK063 CG130JT-F
UMK063 CG150JT-F
UMK063 CG160JT-F
UMK063 CG180JT-F
UMK063 CG200JT-F
UMK063 CG220JT-F
UMK063 CG240JT-F
UMK063 CG270JT-F
UMK063 CG300JT-F
UMK063 CG330JT-F
UMK063 CG360JT-F
UMK063 CG390JT-F
UMK063 CG430JT-F
UMK063 CG470JT-F
UMK063 CG510JT-F
UMK063 CG560JT-F
UMK063 CG620JT-F
UMK063 CG680JT-F
UMK063 CG750JT-F
UMK063 CG820JT-F
UMK063 CG910JT-F
UMK063 CG101JT-F
TMK063 CG111JT-F
TMK063 CG121JT-F
TMK063 CG131JT-F
TMK063 CG151JT-F
TMK063 CG181JT-F
TMK063 CG201JT-F
TMK063 CG221JT-F
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
7.7 p
7.8 p
7.9 p
8 p
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5％
554
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
556
558
560
8.1 p
8.2 p
8.3 p
8.4 p
8.5 p
8.6 p
8.7 p
8.8 p
8.9 p
9 p
562
564
566
568
570
572
574
576
578
580
9.1 p
9.2 p
9.3 p
9.4 p
9.5 p
9.6 p
9.7 p
9.8 p
9.9 p
10 p
11 p
12 p
13 p
15 p
16 p
18 p
20 p
22 p
24 p
27 p
30 p
33 p
36 p
39 p
43 p
47 p
51 p
56 p
62 p
68 p
75 p
82 p
91 p
100 p
110 p
120 p
130 p
150 p
180 p
200 p
220 p
582
584
586
588
590
592
594
596
598
600
50
620
±5％
640
±5％
660
±5％
700
±5％
720
±5％
760
±5％
800
±5％
840
±5％
880
±5％
940
±5％
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
25
±5％
±5％
±5％
±5％
【Temperature Characteristic C△ : C△/C0△】ꢀ0.3mm thickness（T）
Q
(at 1MHz)
min
Soldering
R:Reflow
W:Wave
R
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
UMK063 CK0R2CT-F
UMK063 CK0R3CT-F
UMK063 CK0R4CT-F
UMK063 CK0R5CT-F
UMK063 CK0R6CT-F
UMK063 CK0R7CT-F
UMK063 CKR75CT-F
UMK063 CK0R8CT-F
UMK063 CK0R9CT-F
UMK063 CK010CT-F
UMK063 CK1R1CT-F
UMK063 CK1R2CT-F
UMK063 CK1R3CT-F
UMK063 CK1R4CT-F
UMK063 CK1R5CT-F
UMK063 CK1R6CT-F
UMK063 CK1R7CT-F
UMK063 CK1R8CT-F
UMK063 CK1R9CT-F
UMK063 CK020CT-F
UMK063 CK2R1CT-F
UMK063 CK2R2CT-F
UMK063 CK2R3CT-F
UMK063 CK2R4CT-F
UMK063 CK2R5CT-F
UMK063 CK2R6CT-F
UMK063 CK2R7CT-F
UMK063 CK2R8CT-F
UMK063 CK2R9CT-F
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
0.2 p
0.3 p
0.4 p
0.5 p
0.6 p
0.7 p
0.75 p
0.8 p
0.9 p
1 p
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
404
406
408
410
412
414
415
416
418
420
422
424
426
428
430
432
434
436
438
440
442
444
446
448
450
452
454
456
458
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
R
R
R
R
R
R
R
R
R
1.1 p
1.2 p
1.3 p
1.4 p
1.5 p
1.6 p
1.7 p
1.8 p
1.9 p
2 p
R
R
R
R
50
R
R
R
R
R
R
2.1 p
2.2 p
2.3 p
2.4 p
2.5 p
2.6 p
2.7 p
2.8 p
2.9 p
R
R
R
R
R
R
R
R
R
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
19
■PARTS NUMBER
Part number 1
Q
(at 1MHz)
min
460
462
464
466
468
470
472
474
476
478
480
482
484
486
488
490
492
494
496
498
500
502
504
506
508
510
512
514
516
518
520
522
524
526
528
530
532
534
536
538
540
542
544
546
548
550
552
554
556
558
560
562
564
566
568
570
572
574
576
578
580
582
584
586
588
590
592
594
596
598
600
620
640
660
700
720
760
800
840
880
940
1000
1000
1000
1000
1000
1000
1000
Soldering
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
Part number 2
Rated voltage [V]
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Rated voltage x ％
UMK063 CJ030CT-F
UMK063 CJ3R1CT-F
UMK063 CJ3R2CT-F
UMK063 CJ3R3CT-F
UMK063 CJ3R4CT-F
UMK063 CJ3R5CT-F
UMK063 CJ3R6CT-F
UMK063 CJ3R7CT-F
UMK063 CJ3R8CT-F
UMK063 CJ3R9CT-F
UMK063 CH040CT-F
UMK063 CH4R1CT-F
UMK063 CH4R2CT-F
UMK063 CH4R3CT-F
UMK063 CH4R4CT-F
UMK063 CH4R5CT-F
UMK063 CH4R6CT-F
UMK063 CH4R7CT-F
UMK063 CH4R8CT-F
UMK063 CH4R9CT-F
UMK063 CH050CT-F
UMK063 CH5R1DT-F
UMK063 CH5R2DT-F
UMK063 CH5R3DT-F
UMK063 CH5R4DT-F
UMK063 CH5R5DT-F
UMK063 CH5R6DT-F
UMK063 CH5R7DT-F
UMK063 CH5R8DT-F
UMK063 CH5R9DT-F
UMK063 CH060DT-F
UMK063 CH6R1DT-F
UMK063 CH6R2DT-F
UMK063 CH6R3DT-F
UMK063 CH6R4DT-F
UMK063 CH6R5DT-F
UMK063 CH6R6DT-F
UMK063 CH6R7DT-F
UMK063 CH6R8DT-F
UMK063 CH6R9DT-F
UMK063 CH070DT-F
UMK063 CH7R1DT-F
UMK063 CH7R2DT-F
UMK063 CH7R3DT-F
UMK063 CH7R4DT-F
UMK063 CH7R5DT-F
UMK063 CH7R6DT-F
UMK063 CH7R7DT-F
UMK063 CH7R8DT-F
UMK063 CH7R9DT-F
UMK063 CH080DT-F
UMK063 CH8R1DT-F
UMK063 CH8R2DT-F
UMK063 CH8R3DT-F
UMK063 CH8R4DT-F
UMK063 CH8R5DT-F
UMK063 CH8R6DT-F
UMK063 CH8R7DT-F
UMK063 CH8R8DT-F
UMK063 CH8R9DT-F
UMK063 CH090DT-F
UMK063 CH9R1DT-F
UMK063 CH9R2DT-F
UMK063 CH9R3DT-F
UMK063 CH9R4DT-F
UMK063 CH9R5DT-F
UMK063 CH9R6DT-F
UMK063 CH9R7DT-F
UMK063 CH9R8DT-F
UMK063 CH9R9DT-F
UMK063 CH100DT-F
UMK063 CH110JT-F
UMK063 CH120JT-F
UMK063 CH130JT-F
UMK063 CH150JT-F
UMK063 CH160JT-F
UMK063 CH180JT-F
UMK063 CH200JT-F
UMK063 CH220JT-F
UMK063 CH240JT-F
UMK063 CH270JT-F
UMK063 CH300JT-F
UMK063 CH330JT-F
UMK063 CH360JT-F
UMK063 CH390JT-F
UMK063 CH430JT-F
UMK063 CH470JT-F
UMK063 CH510JT-F
CJ
CJ
CJ
CJ
CJ
CJ
CJ
CJ
CJ
CJ
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
C0J
C0J
C0J
C0J
C0J
C0J
C0J
C0J
C0J
C0J
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
3 p
3.1 p
3.2 p
3.3 p
3.4 p
3.5 p
3.6 p
3.7 p
3.8 p
3.9 p
4 p
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5％
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
4.1 p
4.2 p
4.3 p
4.4 p
4.5 p
4.6 p
4.7 p
4.8 p
4.9 p
5 p
5.1 p
5.2 p
5.3 p
5.4 p
5.5 p
5.6 p
5.7 p
5.8 p
5.9 p
6 p
6.1 p
6.2 p
6.3 p
6.4 p
6.5 p
6.6 p
6.7 p
6.8 p
6.9 p
7 p
7.1 p
7.2 p
7.3 p
7.4 p
7.5 p
7.6 p
7.7 p
7.8 p
7.9 p
8 p
50
8.1 p
8.2 p
8.3 p
8.4 p
8.5 p
8.6 p
8.7 p
8.8 p
8.9 p
9 p
9.1 p
9.2 p
9.3 p
9.4 p
9.5 p
9.6 p
9.7 p
9.8 p
9.9 p
10 p
11 p
12 p
13 p
15 p
16 p
18 p
20 p
22 p
24 p
27 p
30 p
33 p
36 p
39 p
43 p
47 p
51 p
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
20
■PARTS NUMBER
Part number 1
Q
(at 1MHz)
min
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
Part number 2
Rated voltage [V]
Rated voltage x ％
UMK063 CH560JT-F
UMK063 CH620JT-F
UMK063 CH680JT-F
UMK063 CH750JT-F
UMK063 CH820JT-F
UMK063 CH910JT-F
UMK063 CH101JT-F
TMK063 CH111JT-F
TMK063 CH121JT-F
TMK063 CH131JT-F
TMK063 CH151JT-F
TMK063 CH181JT-F
TMK063 CH201JT-F
TMK063 CH221JT-F
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
56 p
62 p
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
R
R
R
R
R
R
R
R
R
R
R
R
R
R
68 p
50
75 p
82 p
91 p
100 p
110 p
120 p
130 p
150 p
180 p
200 p
220 p
25
●105TYPE
【Temperature Characteristic CG : CG/C0G】ꢀ0.5mm thickness（V）
Q
(at 1MHz)
min
Soldering
R:Reflow
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
UMK105 CG0R5CV-F
UMK105 CG010CV-F
UMK105 CG1R5CV-F
UMK105 CG020CV-F
UMK105 CG030CV-F
UMK105 CG040CV-F
UMK105 CG050CV-F
UMK105 CG060DV-F
UMK105 CG070DV-F
UMK105 CG080DV-F
UMK105 CG090DV-F
UMK105 CG100DV-F
UMK105 CG120JV-F
UMK105 CG150JV-F
UMK105 CG180JV-F
UMK105 CG220JV-F
UMK105 CG270JV-F
UMK105 CG330JV-F
UMK105 CG390JV-F
UMK105 CG470JV-F
UMK105 CG560JV-F
UMK105 CG680JV-F
UMK105 CG820JV-F
UMK105 CG101JV-F
UMK105 CG121JV-F
UMK105 CG151JV-F
UMK105 CG181JV-F
UMK105 CG221JV-F
UMK105 CG271JV-F
UMK105 CG331JV-F
UMK105 CG361JV-F
UMK105 CG391JV-F
UMK105 CG431JV-F
UMK105 CG471JV-F
UMK105 CG511JV-F
UMK105 CG561JV-F
UMK105 CG621JV-F
UMK105 CG681JV-F
UMK105 CG751JV-F
UMK105 CG821JV-F
UMK105 CG102JV-F
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
0.5 p
1 p
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5％
410
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
420
1.5 p
2 p
430
440
3 p
460
4 p
480
5 p
500
6 p
520
7 p
540
8 p
560
9 p
580
10 p
12 p
15 p
18 p
22 p
27 p
33 p
39 p
47 p
56 p
68 p
82 p
100 p
120 p
150 p
180 p
220 p
270 p
330 p
360 p
390 p
430 p
470 p
510 p
560 p
620 p
680 p
750 p
820 p
1000 p
600
640
±5％
700
±5％
760
±5％
840
±5％
940
±5％
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
±5％
±5％
50
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
【Temperature Characteristic C△ : C△/C0△】ꢀ0.5mm thickness（V）
Q
(at 1MHz)
min
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
UMK105 CK0R5CV-F
UMK105 CK010CV-F
UMK105 CK1R5CV-F
UMK105 CK020CV-F
UMK105 CJ030CV-F
UMK105 CH040CV-F
UMK105 CH050CV-F
UMK105 CH060DV-F
UMK105 CH070DV-F
UMK105 CH080DV-F
UMK105 CH090DV-F
UMK105 CH100DV-F
UMK105 CH120JV-F
UMK105 CH150JV-F
UMK105 CH180JV-F
UMK105 CH220JV-F
UMK105 CH270JV-F
UMK105 CH330JV-F
UMK105 CH390JV-F
UMK105 CH470JV-F
UMK105 CH560JV-F
UMK105 CH680JV-F
UMK105 CH820JV-F
CK
CK
CK
CK
CJ
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
C0K
C0K
C0K
C0K
C0J
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
0.5 p
1 p
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5％
410
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
420
1.5 p
2 p
430
440
3 p
460
4 p
480
5 p
500
6 p
520
7 p
540
8 p
560
9 p
580
50
10 p
12 p
15 p
18 p
22 p
27 p
33 p
39 p
47 p
56 p
68 p
82 p
600
640
±5％
700
±5％
760
±5％
840
±5％
940
±5％
1000
1000
1000
1000
1000
1000
±5％
±5％
±5％
±5％
±5％
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
21
■PARTS NUMBER
Part number 1
Q
(at 1MHz)
min
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
Part number 2
Rated voltage [V]
Rated voltage x ％
UMK105 CH101JV-F
UMK105 CH121JV-F
UMK105 CH151JV-F
UMK105 CH181JV-F
UMK105 CH221JV-F
UMK105 CH271JV-F
UMK105 CH331JV-F
UMK105 CH361JV-F
UMK105 CH391JV-F
UMK105 CH431JV-F
UMK105 CH471JV-F
UMK105 CH511JV-F
UMK105 CH561JV-F
UMK105 CH621JV-F
UMK105 CH681JV-F
UMK105 CH751JV-F
UMK105 CH821JV-F
UMK105 CH102JV-F
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
100 p
120 p
150 p
180 p
220 p
270 p
330 p
360 p
390 p
430 p
470 p
510 p
560 p
620 p
680 p
750 p
820 p
1000 p
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
50
【Temperature Characteristic U△ : U△/U2△】ꢀ0.5mm thickness（V）
Q
(at 1MHz)
min
Soldering
R:Reflow
W:Wave
R
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
UMK105 UK0R5CV-F
UMK105 UK010CV-F
UMK105 UK1R5CV-F
UMK105 UK020CV-F
UMK105 UK030CV-F
UMK105 UJ040CV-F
UMK105 UJ050CV-F
UMK105 UJ060DV-F
UMK105 UJ070DV-F
UMK105 UJ080DV-F
UMK105 UJ090DV-F
UMK105 UJ100DV-F
UMK105 UJ120JV-F
UMK105 UJ150JV-F
UMK105 UJ180JV-F
UMK105 UJ220JV-F
UMK105 UJ270JV-F
UMK105 UJ330JV-F
UMK105 UJ390JV-F
UMK105 UJ470JV-F
UMK105 UJ560JV-F
UMK105 UJ680JV-F
UMK105 UJ820JV-F
UMK105 UJ101JV-F
UMK105 UJ121JV-F
UMK105 UJ151JV-F
UMK105 UJ181JV-F
UMK105 UJ221JV-F
UMK105 UJ271JV-F
UMK105 UJ331JV-F
UK
UK
UK
UK
UK
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
U2K
U2K
U2K
U2K
U2K
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
0.5 p
1 p
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5％
410
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
420
R
1.5 p
2 p
430
R
440
R
3 p
460
R
4 p
480
R
5 p
500
R
6 p
520
R
7 p
540
R
8 p
560
R
9 p
580
R
10 p
12 p
15 p
18 p
22 p
27 p
33 p
39 p
47 p
56 p
68 p
82 p
100 p
120 p
150 p
180 p
220 p
270 p
330 p
600
R
640
R
±5％
700
R
±5％
760
R
50
±5％
840
R
±5％
940
R
±5％
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
R
±5％
R
±5％
R
±5％
R
±5％
R
±5％
R
±5％
R
±5％
R
±5％
R
±5％
R
±5％
R
±5％
R
±5％
R
【Temperature Characteristic SL】ꢀ0.5mm thickness（V）
Q
(at 1MHz)
min
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
UMK105 SL121JV-F
UMK105 SL151JV-F
UMK105 SL181JV-F
UMK105 SL221JV-F
UMK105 SL271JV-F
UMK105 SL331JV-F
SL
SL
SL
SL
SL
SL
120 p
150 p
180 p
220 p
270 p
330 p
±5％
±5％
±5％
±5％
±5％
±5％
1000
200
200
200
200
200
200
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
1000
1000
50
1000
1000
1000
Multilayer Ceramic Capacitors for High Frequency Applications (1GHz+)
●042TYPE
【Temperature Characteristic CH : CH/C0H】ꢀ0.2mm thickness（C）
Q
(at 1GHz)
(min)
300
300
300
300
300
300
300
300
300
300
280
270
260
240
230
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
TVS042 CH0R2[]C-W
TVS042 CH0R3[]C-W
TVS042 CH0R4[]C-W
TVS042 CH0R5[]C-W
TVS042 CH0R6[]C-W
TVS042 CH0R7[]C-W
TVS042 CHR75[]C-W
TVS042 CH0R8[]C-W
TVS042 CH0R9[]C-W
TVS042 CH010[]C-W
TVS042 CH1R1[]C-W
TVS042 CH1R2[]C-W
TVS042 CH1R3[]C-W
TVS042 CH1R5[]C-W
TVS042 CH1R6[]C-W
TVS042 CH1R8[]C-W
TVS042 CH020[]C-W
TVS042 CH2R2[]C-W
TVS042 CH2R4[]C-W
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
0.2 p
0.3 p
0.4 p
0.5 p
0.6 p
0.7 p
0.75 p
0.8 p
0.9 p
1 p
1.1 p
1.2 p
1.3 p
1.5 p
1.6 p
1.8 p
2 p
±0.1pF, 0.25pF
±0.1pF, 0.25pF
±0.1pF, 0.25pF
±0.1pF, 0.25pF
±0.1pF, 0.25pF
±0.1pF, 0.25pF
±0.1pF, 0.25pF
±0.1pF, 0.25pF
±0.1pF, 0.25pF
±0.1pF, 0.25pF
±0.1pF, 0.25pF
±0.1pF, 0.25pF
±0.1pF, 0.25pF
±0.1pF, 0.25pF
±0.1pF, 0.25pF
±0.1pF, 0.25pF
±0.1pF, 0.25pF
±0.1pF, 0.25pF
±0.1pF, 0.25pF
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
25
210
190
180
170
2.2 p
2.4 p
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
22
■PARTS NUMBER
Part number 1
Q
(at 1GHz)
(min)
150
130
120
110
100
90
85
85
80
75
70
65
65
60
60
55
55
50
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
Part number 2
Rated voltage [V]
Rated voltage x ％
TVS042 CH2R7[]C-W
TVS042 CH030[]C-W
TVS042 CH3R3[]C-W
TVS042 CH3R6[]C-W
TVS042 CH3R9[]C-W
TVS042 CH040[]C-W
TVS042 CH4R3[]C-W
TVS042 CH4R7[]C-W
TVS042 CH050[]C-W
TVS042 CH5R1[]C-W
TVS042 CH5R6[]C-W
TVS042 CH060[]C-W
TVS042 CH6R2[]C-W
TVS042 CH6R8[]C-W
TVS042 CH070[]C-W
TVS042 CH7R5[]C-W
TVS042 CH080[]C-W
TVS042 CH8R2[]C-W
TVS042 CH090[]C-W
TVS042 CH9R1[]C-W
TVS042 CH100[]C-W
TVS042 CH110JC-W
TVS042 CH120JC-W
TVS042 CH130JC-W
TVS042 CH150JC-W
TVS042 CH160JC-W
TVS042 CH180JC-W
TVS042 CH220JC-W
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
2.7 p
3 p
3.3 p
3.6 p
3.9 p
4 p
4.3 p
4.7 p
5 p
5.1 p
5.6 p
6 p
6.2 p
6.8 p
7 p
7.5 p
8 p
±0.1pF, 0.25pF
±0.1pF, 0.25pF
±0.1pF, 0.25pF
±0.1pF, 0.25pF
±0.1pF, 0.25pF
±0.1pF, 0.25pF
±0.1pF, 0.25pF
±0.1pF, 0.25pF
±0.1pF, 0.25pF
±0.25pF, 0.5pF
±0.25pF, 0.5pF
±0.25pF, 0.5pF
±0.25pF, 0.5pF
±0.25pF, 0.5pF
±0.25pF, 0.5pF
±0.25pF, 0.5pF
±0.25pF, 0.5pF
±0.25pF, 0.5pF
±0.25pF, 0.5pF
±0.25pF, 0.5pF
±2%, ±5%
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
25
8.2 p
9 p
50
45
45
40
40
40
40
40
9.1 p
10 p
11 p
12 p
13 p
15 p
16 p
18 p
22 p
±5%
±5%
±5%
±5%
±5%
±5%
±5%
40
30
●105TYPE
【Temperature Characteristic CH : CH/C0H】ꢀ0.5mm thickness（W）
Q
(at 1GHz)
(min)
300
300
300
300
300
300
300
300
280
270
260
240
230
210
190
180
170
150
130
120
110
99
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
EVK105 CH0R3BW-F
EVK105 CH0R4BW-F
EVK105 CH0R5BW-F
EVK105 CH0R6BW-F
EVK105 CH0R7BW-F
EVK105 CH0R8BW-F
EVK105 CH0R9BW-F
EVK105 CH010BW-F
EVK105 CH1R1BW-F
EVK105 CH1R2BW-F
EVK105 CH1R3BW-F
EVK105 CH1R5BW-F
EVK105 CH1R6BW-F
EVK105 CH1R8BW-F
EVK105 CH020BW-F
EVK105 CH2R2JW-F
EVK105 CH2R4JW-F
EVK105 CH2R7JW-F
EVK105 CH030JW-F
EVK105 CH3R3JW-F
EVK105 CH3R6JW-F
EVK105 CH3R9JW-F
EVK105 CH4R3JW-F
EVK105 CH4R7JW-F
EVK105 CH5R1JW-F
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
0.3 p
0.4 p
0.5 p
0.6 p
0.7 p
0.8 p
0.9 p
1 p
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±5％
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
1.1 p
1.2 p
1.3 p
1.5 p
1.6 p
1.8 p
2 p
16
2.2 p
2.4 p
2.7 p
3 p
±5％
±5％
±5％
3.3 p
3.6 p
3.9 p
4.3 p
4.7 p
5.1 p
±5％
±5％
±5％
±5％
84
±5％
84
±5％
84
【Temperature Characteristic CH : CH/C0H】ꢀ0.5mm thickness（W）
Q
(at 1GHz)
(min)
300
300
300
300
300
300
300
300
280
270
260
240
230
210
190
180
170
150
130
120
110
99
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
UVK105 CH0R3BW-F
UVK105 CH0R4BW-F
UVK105 CH0R5BW-F
UVK105 CH0R6BW-F
UVK105 CH0R7BW-F
UVK105 CH0R8BW-F
UVK105 CH0R9BW-F
UVK105 CH010BW-F
UVK105 CH1R1BW-F
UVK105 CH1R2BW-F
UVK105 CH1R3BW-F
UVK105 CH1R5BW-F
UVK105 CH1R6BW-F
UVK105 CH1R8BW-F
UVK105 CH020BW-F
UVK105 CH2R2JW-F
UVK105 CH2R4JW-F
UVK105 CH2R7JW-F
UVK105 CH030JW-F
UVK105 CH3R3JW-F
UVK105 CH3R6JW-F
UVK105 CH3R9JW-F
UVK105 CH4R3JW-F
UVK105 CH4R7JW-F
UVK105 CH5R1JW-F
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
0.3 p
0.4 p
0.5 p
0.6 p
0.7 p
0.8 p
0.9 p
1 p
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±5％
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
1.1 p
1.2 p
1.3 p
1.5 p
1.6 p
1.8 p
2 p
50
2.2 p
2.4 p
2.7 p
3 p
±5％
±5％
±5％
3.3 p
3.6 p
3.9 p
4.3 p
4.7 p
5.1 p
±5％
±5％
±5％
±5％
84
±5％
84
±5％
84
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
23
■PARTS NUMBER
Super Low Distortion Multilayer Ceramic Capacitors (CFCAPTM
●105TYPE
)
【Temperature Characteristic SD : Standard】ꢀ0.5mm thickness（V）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
UMK105 SD391KV-F
UMK105 SD471KV-F
UMK105 SD561KV-F
TMK105 SD681KV-F
TMK105 SD821KV-F
TMK105 SD102KV-F
TMK105 SD122KV-F
EMK105 SD152KV-F
EMK105 SD182KV-F
EMK105 SD222KV-F
EMK105 SD272KV-F
LMK105 SD332KV-F
LMK105 SD392KV-F
LMK105 SD472KV-F
390 p
470 p
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
R
R
R
R
R
R
50
25
560 p
680 p
820 p
1000 p
1200 p
1500 p
1800 p
2200 p
2700 p
3300 p
3900 p
4700 p
Standard Type
16
10
【Temperature Characteristic SD : Standard】ꢀ0.3mm thickness（P）
Soldering
R:Reflow
W:Wave
R
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
LMK105 SD152KP-F
JMK105 SD272KP-F
10
1500 p
2700 p
±10
±10
0.1
0.1
200
200
0.3±0.03
0.3±0.03
Standard Type
6.3
R
●107TYPE
【Temperature Characteristic SD : Standard】ꢀ0.8mm thickness（A）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
UMK107 SD102KA-T
UMK107 SD122KA-T
UMK107 SD152KA-T
UMK107 SD182KA-T
UMK107 SD222KA-T
UMK107 SD272KA-T
UMK107 SD332KA-T
TMK107 SD392KA-T
TMK107 SD472KA-T
EMK107 SD562KA-T
EMK107 SD682KA-T
EMK107 SD822KA-T
EMK107 SD103KA-T
LMK107 SD123KA-T
LMK107 SD153KA-T
LMK107 SD183KA-T
LMK107 SD223KA-T
1000 p
1200 p
1500 p
1800 p
2200 p
2700 p
3300 p
3900 p
4700 p
5600 p
6800 p
8200 p
10000 p
12000 p
15000 p
18000 p
22000 p
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
50
Standard Type
25
16
10
Standard Type
●212TYPE
【Temperature Characteristic SD : Standard】ꢀ1.25mm thickness（G）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
35
Rated voltage x ％
GMK212 SD183KG-T
GMK212 SD223KG-T
GMK212 SD273KG-T
LMK212 SD683KG-T
LMK212 SD823KG-T
LMK212 SD104KG-T
18000 p
22000 p
27000 p
68000 p
82000 p
0.1 μ
±10
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
0.1
200
200
200
200
200
200
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
R
R
R
R
R
R
Standard Type
10
【Temperature Characteristic SD : Standard】ꢀ0.85mm thickness（D）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
UMK212 SD392KD-T
UMK212 SD472KD-T
UMK212 SD562KD-T
UMK212 SD682KD-T
UMK212 SD822KD-T
UMK212 SD103KD-T
GMK212 SD123KD-T
GMK212 SD153KD-T
EMK212 SD333KD-T
LMK212 SD473KD-T
3900 p
4700 p
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
200
200
200
200
200
200
200
200
200
200
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
R
R
R
R
R
R
R
R
R
R
5600 p
50
35
6800 p
8200 p
Standard Type
10000 p
12000 p
15000 p
33000 p
47000 p
16
10
●316TYPE
【Temperature Characteristic SD : Standard】ꢀ1.6mm thickness（L）
Soldering
R:Reflow
W:Wave
R
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
25
Rated voltage x ％
TMK316 SD823KL-T
TMK316 SD104KL-T
82000 p
0.1 μ
±10
±10
0.1
0.1
200
200
1.6±0.20
1.6±0.20
Standard Type
R
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
24
■PARTS NUMBER
【Temperature Characteristic SD : Standard】ꢀ1.15mm thickness（F）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
35
Rated voltage x ％
GMK316 SD333KF-T
GMK316 SD393KF-T
TMK316 SD473KF-T
TMK316 SD563KF-T
TMK316 SD683KF-T
33000 p
39000 p
47000 p
56000 p
68000 p
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
200
200
200
200
200
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
R
R
R
R
R
Standard Type
25
Low Distortion High Value Multilayer Ceramic Capacitors(CF_LD)
●107TYPE
【Temperature Characteristic LD : X5R】ꢀ0.8mm thickness（A）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
UMK107BLD224[]A-T
TMK107BLD474[]A-T
TMK107BLD105[]A-T
50
25
X5R
X5R
X5R
0.22 μ
0.47 μ
1 μ
±10，±20
±10，±20
±10，±20
10
10
10
150
150
150
0.8+0.20/-0
0.8+0.20/-0
0.8+0.20/-0
R
R
R
●212TYPE
【Temperature Characteristic LD : X5R】ꢀ1.25mm thickness（G）
Soldering
R:Reflow
W:Wave
R
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
35
Rated voltage x ％
GMK212 LD105[]G-T
GMK212BLD225[]G-T
X5R
X5R
1 μ
±10，±20
±10，±20
10
10
150
150
1.25±0.10
2.2 μ
1.25+0.20/-0
R
●316TYPE
【Temperature Characteristic LD : X5R】ꢀ1.6mm thickness（L）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
Rated voltage [V]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage x ％
UMK316 LD105[]L-T
GMK316BLD475[]L-T
TMK316BLD106[]L-T
50
35
25
X5R
X5R
X5R
1 μ
4.7 μ
10 μ
±10，±20
±10，±20
±10，±20
10
10
10
150
150
150
1.6±0.20
1.6±0.30
1.6±0.30
R
R
R
●325TYPE
【Temperature Characteristic LD : X5R】ꢀ1.9mm thickness（N）
Soldering
R:Reflow
W:Wave
R
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
50
Rated voltage x ％
200
UMK325 LD105[]N-T
X5R
1 μ
±10，±20
10
1.9±0.20
【Temperature Characteristic LD : X5R】ꢀ2.5mm thickness（M）
Soldering
R:Reflow
W:Wave
R
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
50
Rated voltage x ％
150
UMK325 LD155[]M-T
X5R
1.5 μ
±10，±20
5
2.5±0.20
Medium-High Voltage Multilayer Ceramic Capacitors
●107TYPE
【Temperature Characteristic BJ : B/X5R】ꢀ0.8mm thickness（A）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
X5R*1
B
HMK107 BJ102[]A-T
HMK107 BJ152[]A-T
HMK107 BJ222[]A-T
HMK107 BJ332[]A-T
HMK107 BJ472[]A-T
HMK107 BJ682[]A-T
HMK107 BJ103[]A-T
HMK107 BJ153[]A-T
HMK107 BJ223[]A-T
HMK107 BJ333[]A-T
HMK107 BJ473[]A-T
HMK107 BJ104[]A-T
1000 p
1500 p
2200 p
3300 p
4700 p
6800 p
10000 p
15000 p
22000 p
33000 p
47000 p
0.1 μ
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
200
200
200
200
200
200
200
200
200
200
200
200
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
R
R
R
R
R
R
R
R
R
R
R
R
X5R*1
B
X5R*1
B
X5R*1
B
X5R*1
B
X5R*1
B
100
X5R*1
B
X5R*1
B
X5R*1
B
X5R*1
B
X5R*1
B
X5R*1
B
【Temperature Characteristic B7 : X7R , C7 : X7S】ꢀ0.8mm thickness（A）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
HMK107 B7102[]A-T
HMK107 B7152[]A-T
HMK107 B7222[]A-T
HMK107 B7332[]A-T
HMK107 B7472[]A-T
HMK107 B7682[]A-T
HMK107 B7103[]A-T
HMK107 B7153[]A-T
HMK107 B7223[]A-T
HMK107 B7333[]A-T
HMK107 B7473[]A-T
HMK107 C7104[]A-T
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7S
1000 p
1500 p
2200 p
3300 p
4700 p
6800 p
10000 p
15000 p
22000 p
33000 p
47000 p
0.1 μ
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
200
200
200
200
200
200
200
200
200
200
200
200
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
R
R
R
R
R
R
R
R
R
R
R
R
100
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
25
■PARTS NUMBER
●212TYPE
【Temperature Characteristic BJ : B/X5R】ꢀ1.25mm thickness（G）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
X5R*1
B
HMK212 BJ103[]G-T
HMK212 BJ153[]G-T
HMK212 BJ223[]G-T
HMK212 BJ333[]G-T
HMK212 BJ473[]G-T
HMK212 BJ683[]G-T
HMK212 BJ104[]G-T
HMK212 BJ224[]G-T
QMK212 BJ472[]G-T
QMK212 BJ682[]G-T
QMK212 BJ103[]G-T
QMK212 BJ153[]G-T
QMK212 BJ223[]G-T
10000 p
15000 p
22000 p
33000 p
47000 p
68000 p
0.1 μ
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
200
200
200
200
200
200
200
200
150
150
150
150
150
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
R
R
R
R
R
R
R
R
R
R
R
R
R
X5R*1
B
X5R*1
B
X5R*1
B
100
X5R*1
B
X5R*1
B
X5R*1
B
X5R*1
B
0.22 μ
4700 p
X5R*1
B
X5R*1
B
6800 p
X5R*1
B
250
10000 p
15000 p
22000 p
X5R*1
B
X5R*1
B
【Temperature Characteristic BJ : B/X5R】ꢀ0.85mm thickness（D）
Soldering
R:Reflow
W:Wave
R
R
R
R
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
X5R*1
B
QMK212 BJ102[]D-T
QMK212 BJ152[]D-T
QMK212 BJ222[]D-T
QMK212 BJ332[]D-T
1000 p
1500 p
2200 p
3300 p
±10，±20
±10，±20
±10，±20
±10，±20
2.5
2.5
2.5
2.5
150
150
150
150
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
X5R*1
B
250
X5R*1
B
X5R*1
B
【Temperature Characteristic B7 : X7R】ꢀ1.25mm thickness（G）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
HMK212 B7103[]G-T
HMK212 B7153[]G-T
HMK212 B7223[]G-T
HMK212 B7333[]G-T
HMK212 B7473[]G-T
HMK212 B7683[]G-T
HMK212 B7104[]G-T
HMK212 B7224[]G-T
QMK212 B7472[]G-T
QMK212 B7682[]G-T
QMK212 B7103[]G-T
QMK212 B7153[]G-T
QMK212 B7223[]G-T
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
10000 p
15000 p
22000 p
33000 p
47000 p
68000 p
0.1 μ
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
200
200
200
200
200
200
200
200
150
150
150
150
150
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
R
R
R
R
R
R
R
R
R
R
R
R
R
100
0.22 μ
4700 p
6800 p
250
10000 p
15000 p
22000 p
【Temperature Characteristic B7 : X7R】ꢀ0.85mm thickness（D）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
QMK212 B7102[]D-T
QMK212 B7152[]D-T
QMK212 B7222[]D-T
QMK212 B7332[]D-T
X7R
X7R
X7R
X7R
1000 p
1500 p
2200 p
3300 p
±10，±20
±10，±20
±10，±20
±10，±20
2.5
2.5
2.5
2.5
150
150
150
150
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
R
R
R
R
250
●316TYPE
【Temperature Characteristic BJ : B/X5R】ꢀ1.6mm thickness（L）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
X5R*1
B
HMK316 BJ473[]L-T
HMK316 BJ683[]L-T
HMK316 BJ104[]L-T
HMK316 BJ154[]L-T
HMK316 BJ224[]L-T
HMK316 BJ334[]L-T
HMK316 BJ474[]L-T
HMK316 BJ105[]L-T
QMK316 BJ333[]L-T
QMK316 BJ473[]L-T
QMK316 BJ683[]L-T
QMK316 BJ104[]L-T
SMK316 BJ153[]L-T
SMK316 BJ223[]L-T
47000 p
68000 p
0.1 μ
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
200
200
200
200
200
200
200
200
150
150
150
150
120
120
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
R
R
R
R
R
R
R
R
R
R
R
R
R
R
X5R*1
B
X5R*1
B
X5R*1
B
0.15 μ
0.22 μ
0.33 μ
0.47 μ
1 μ
100
X5R*1
B
X5R*1
B
X5R*1
B
X5R*1
B
X5R*1
B
33000 p
47000 p
68000 p
0.1 μ
X5R*1
B
250
630
X5R*1
B
X5R*1
B
X5R*1
B
15000 p
22000 p
X5R*1
B
【Temperature Characteristic BJ : B/X5R】ꢀ1.15mm thickness（F）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
X5R*1
B
SMK316 BJ102[]F-T
SMK316 BJ152[]F-T
SMK316 BJ222[]F-T
SMK316 BJ332[]F-T
SMK316 BJ472[]F-T
SMK316 BJ682[]F-T
SMK316 BJ103[]F-T
1000 p
1500 p
2200 p
3300 p
4700 p
6800 p
10000 p
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
2.5
2.5
2.5
2.5
2.5
2.5
2.5
120
120
120
120
120
120
120
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
R
R
R
R
R
R
R
X5R*1
B
X5R*1
B
X5R*1
B
630
X5R*1
B
X5R*1
B
X5R*1
B
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
26
■PARTS NUMBER
【Temperature Characteristic B7 : X7R】ꢀ1.6mm thickness（L）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
HMK316 B7473[]L-T
HMK316 B7683[]L-T
HMK316 B7104[]L-T
HMK316 B7154[]L-T
HMK316 B7224[]L-T
HMK316 B7334[]L-T
HMK316 B7474[]L-T
HMK316 B7105[]L-T
QMK316 B7333[]L-T
QMK316 B7473[]L-T
QMK316 B7683[]L-T
QMK316 B7104[]L-T
SMK316 B7153[]L-T
SMK316 B7223[]L-T
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
47000 p
68000 p
0.1 μ
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
200
200
200
200
200
200
200
200
150
150
150
150
120
120
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
R
R
R
R
R
R
R
R
R
R
R
R
R
R
0.15 μ
0.22 μ
0.33 μ
0.47 μ
1 μ
100
33000 p
47000 p
68000 p
0.1 μ
250
630
15000 p
22000 p
【Temperature Characteristic B7 : X7R】ꢀ1.15mm thickness（F）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
SMK316 B7102[]F-T
SMK316 B7152[]F-T
SMK316 B7222[]F-T
SMK316 B7332[]F-T
SMK316 B7472[]F-T
SMK316 B7682[]F-T
SMK316 B7103[]F-T
X7R
X7R
X7R
X7R
X7R
X7R
X7R
1000 p
1500 p
2200 p
3300 p
4700 p
6800 p
10000 p
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
2.5
2.5
2.5
2.5
2.5
2.5
2.5
120
120
120
120
120
120
120
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
R
R
R
R
R
R
R
630
●325TYPE
【Temperature Characteristic BJ : B/X5R】ꢀ2.5mm thickness（M）
Soldering
R:Reflow
W:Wave
R
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
100
Rated voltage x ％
200
X5R*1
B
HMK325 BJ225[]M-T
2.2 μ
±10，±20
3.5
2.5±0.20
【Temperature Characteristic BJ : B/X5R】ꢀ1.9mm thickness（N）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
X5R*1
B
HMK325 BJ154[]N-T
HMK325 BJ224[]N-T
HMK325 BJ334[]N-T
HMK325 BJ474[]N-T
HMK325 BJ684[]N-T
HMK325 BJ105[]N-T
QMK325 BJ473[]N-T
QMK325 BJ104[]N-T
QMK325 BJ154[]N-T
QMK325 BJ224[]N-T
SMK325 BJ223[]N-T
SMK325 BJ333[]N-T
SMK325 BJ473[]N-T
0.15 μ
0.22 μ
0.33 μ
0.47 μ
0.68 μ
1 μ
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
200
200
200
200
200
200
150
150
150
150
120
120
120
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
R
R
R
R
R
R
R
R
R
R
R
R
R
X5R*1
B
X5R*1
B
100
X5R*1
B
X5R*1
B
X5R*1
B
X5R*1
B
47000 p
0.1 μ
X5R*1
B
250
630
X5R*1
B
0.15 μ
0.22 μ
22000 p
33000 p
47000 p
X5R*1
B
X5R*1
B
X5R*1
B
X5R*1
B
【Temperature Characteristic BJ : B/X5R】ꢀ1.15mm thickness（F）
Soldering
R:Reflow
W:Wave
R
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
100
Rated voltage x ％
200
X5R*1
B
HMK325 BJ104[]F-T
0.1 μ
±10，±20
3.5
1.15±0.10
【Temperature Characteristic B7 : X7R】ꢀ2.5mm thickness（M）
Soldering
R:Reflow
W:Wave
R
Thickness*3
[mm]
Rated voltage [V]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage x ％
200
HMK325 B7225[]M-T
100
X7R
2.2 μ
±10，±20
3.5
2.5±0.20
【Temperature Characteristic B7 : X7R】ꢀ1.9mm thickness（N）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
HMK325 B7154[]N-T
HMK325 B7224[]N-T
HMK325 B7334[]N-T
HMK325 B7474[]N-T
HMK325 B7684[]N-T
HMK325 B7105[]N-T
QMK325 B7473[]N-T
QMK325 B7104[]N-T
QMK325 B7154[]N-T
QMK325 B7224[]N-T
SMK325 B7223[]N-T
SMK325 B7333[]N-T
SMK325 B7473[]N-T
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
0.15 μ
0.22 μ
0.33 μ
0.47 μ
0.68 μ
1 μ
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
200
200
200
200
200
200
150
150
150
150
120
120
120
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
R
R
R
R
R
R
R
R
R
R
R
R
R
100
47000 p
0.1 μ
250
630
0.15 μ
0.22 μ
22000 p
33000 p
47000 p
【Temperature Characteristic B7 : X7R】ꢀ1.15mm thickness（F）
Soldering
R:Reflow
W:Wave
R
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
100
Rated voltage x ％
200
HMK325 B7104[]F-T
X7R
0.1 μ
±10，±20
3.5
1.15±0.10
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
27
■PARTS NUMBER
●432TYPE
【Temperature Characteristic BJ : B/X5R】 2.5mm thickness（M）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
X5R*1
B
HMK432 BJ474[]M-T
HMK432 BJ105[]M-T
HMK432 BJ155[]M-T
HMK432 BJ225[]M-T
QMK432 BJ104[]M-T
QMK432 BJ224[]M-T
QMK432 BJ334[]M-T
QMK432 BJ474[]M-T
SMK432 BJ473[]M-T
SMK432 BJ683[]M-T
SMK432 BJ104[]M-T
0.47 μ
1 μ
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
200
200
200
200
150
150
150
150
120
120
120
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
R
R
R
R
R
R
R
R
R
R
R
X5R*1
B
100
X5R*1
B
1.5 μ
X5R*1
B
2.2 μ
X5R*1
B
0.1 μ
X5R*1
B
0.22 μ
0.33 μ
0.47 μ
47000 p
68000 p
0.1 μ
250
630
X5R*1
B
X5R*1
B
X5R*1
B
X5R*1
B
X5R*1
B
【Temperature Characteristic B7 : X7R】 2.5mm thickness（M）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
HMK432 B7474[]M-T
HMK432 B7105[]M-T
HMK432 B7155[]M-T
HMK432 B7225[]M-T
QMK432 B7104[]M-T
QMK432 B7224[]M-T
QMK432 B7334[]M-T
QMK432 B7474[]M-T
SMK432 B7473[]M-T
SMK432 B7683[]M-T
SMK432 B7104[]M-T
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
0.47 μ
1 μ
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
200
200
200
200
150
150
150
150
120
120
120
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
R
R
R
R
R
R
R
R
R
R
R
100
1.5 μ
2.2 μ
0.1 μ
0.22 μ
0.33 μ
0.47 μ
47000 p
68000 p
0.1 μ
250
630
LW Reversal Decoupling Capacitors (LWDCTM
●105TYPE
)
【Temperature Characteristic BJ : X5R】 0.3mm thickness（P）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
TWK105 BJ104MP-F
EWK105 BJ224MP-F
LWK105 BJ474MP-F
JWK105 BJ104MP-F
JWK105 BJ474MP-F
JWK105 BJ105MP-F
JWK105 BJ225MP-F
AWK105 BJ224MP-F
25
16
10
X5R
X5R
X5R
X5R*1
X5R*1
X5R
0.1 μ
0.22 μ
0.47 μ
0.1 μ
0.47 μ
1 μ
±20
±20
±20
±20
±20
±20
±20
±20
5
150
150
150
150
150
150
150
150
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
R
R
R
R
R
R
R
R
10
10
5
10
10
10
10
6.3
4
X5R
2.2 μ
0.22 μ
X5R
【Temperature Characteristic C6 : X6S , C7 : X7S】 0.3mm thickness（P）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
EWK105 C6104MP-F
LWK105 C7104MP-F
LWK105 C6224MP-F
JWK105 C7104MP-F
JWK105 C7224MP-F
JWK105 C6474MP-F
AWK105 C6224MP-F
AWK105 C6474MP-F
AWK105 C6105MP-F
AWK105 C6225MP-F
16
10
X6S
X7S
X6S
X7S
X7S
X6S
X6S
X6S
X6S
X6S
0.1 μ
0.1 μ
0.22 μ
0.1 μ
0.22 μ
0.47 μ
0.22 μ
0.47 μ
1 μ
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
5
150
150
150
150
150
150
150
150
150
150
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
R
R
R
R
R
R
R
R
R
R
5
10
5
6.3
4
10
10
10
10
10
10
2.2 μ
●107TYPE
【Temperature Characteristic BJ : X5R】 0.5mm thickness（V）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
X5R*1
X5R*1
X5R*1
X5R
TWK107 BJ104MV-T
EWK107 BJ224MV-T
EWK107 BJ474MV-T
LWK107 BJ105MV-T
LWK107 BJ225MV-T
JWK107 BJ105MV-T
JWK107 BJ225MV-T
JWK107 BJ475MV-T
AWK107 BJ106MV-T
25
16
0.1 μ
0.22 μ
0.47 μ
1 μ
±20
±20
±20
±20
±20
±20
±20
±20
±20
5
150
150
150
150
150
150
150
150
150
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
R
5
5
10
10
10
10
10
10
10
X5R
2.2 μ
1 μ
X5R*1
X5R
6.3
4
2.2 μ
4.7 μ
10 μ
X5R
X5R
【Temperature Characteristic B7 : X7R , C6 : X6S , C7 : X7S】 0.5mm thickness（V）
Temperature
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
characteristics
Rated voltage x ％
TWK107 B7104MV-T
EWK107 B7224MV-T
EWK107 B7474MV-T
JWK107 C7105MV-T
AWK107 C7225MV-T
AWK107 C6475MV-T
PWK107 C6106MV-T
25
16
6.3
4
X7R
X7R
X7R
X7S
X7S
X6S
X6S
0.1 μ
0.22 μ
0.47 μ
1 μ
±20
±20
±20
±20
±20
±20
±20
5
5
150
150
150
150
150
150
150
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
5
10
10
10
10
2.2 μ
4.7 μ
10 μ
2.5
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
28
■PARTS NUMBER
●212TYPE
【Temperature Characteristic BJ : X5R】 0.85mm thickness（D）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
25
16
X5R
X5R
X5R
X5R
X5R
4.7 μ
10 μ
4.7 μ
10 μ
22 μ
±10，±20
±20
10
10
10
10
10
150
150
150
150
150
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
R
R
R
R
R
TWK212 BJ475[]D-T
EWK212 BJ106MD-T
LWK212 BJ475[]D-T
LWK212 BJ106MD-T
JWK212 BJ226MD-T
±10，±20
±20
10
6.3
±20
【Temperature Characteristic B7 : X7R , C6 : X6S】 0.85mm thickness（D）
Soldering
R:Reflow
W:Wave
Thickness*3
[mm]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Part number 1
Part number 2
Rated voltage [V]
Rated voltage x ％
25
16
10
4
X7R
X6S
X6S
X6S
2.2 μ
4.7 μ
10 μ
22 μ
±10，±20
±10，±20
±20
5
150
150
150
150
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
R
R
R
R
TWK212 B7225[]D-T
EWK212 C6475[]D-T
LWK212 C6106MD-T
AWK212 C6226MD-T
10
10
10
±20
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
29
Multilayer Ceramic Capacitors
■PACKAGING
①Minimum Quantity
●Taped package
Thickness
Standard quantity [pcs]
Type(EIA)
mm
0.2
code
C, D
C
Paper tape
Embossed tape
□MK042(01005)
□VS042(01005)
□MK063(0201)
□WK105(0204) ※
－
40000
0.2
0.3
P, T
P
15000
10000
20000
15000
0.3
0.2
C
□MK105(0402)
0.3
P
－
0.5
V
10000
□VK105(0402) ※
□MK107(0603)
0.5
W
K
0.45
0.5
4000
－
□WK107(0306) ※
□MR107(0603)
V
4000
－
0.8
A
0.45
0.85
125
0.85
1.15
125
1.6
K
4000
□MK212(0805)
□WK212(0508)
□MR212(0805)
※
D
G
－
3000
－
D
4000
F
□MK316(1206)
□MR316(1206)
－
－
3000
2000
G
L
0.85
1.15
1.9
D
F
－
－
2000
□MK325(1210)
□MR325(1210)
N
2.0max.
2.5
Y
M
M
500（T）, 1000（P）
500
□MK432(1812)
2.5
Note : ※ LW Reverse type.
②Taping material
※No bottom tape for pressed carrier tape
●Card board carrier tape
●Embossed tape
Top tape
Top tape
Base tape
Sprocket hole
Chip cavity
Sprocket hole
Chip cavity
Bottom tape
Base tape
Chip filled
Chip
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_pack_e-E02R01
③Representative taping dimensions
●Paper Tape（8mm wide）
●Pressed carrier tape（ 2mm pitch）
Chip Cavity
Insertion Pitch
Ｆ
Tape Thickness
Type(EIA)
Ａ
Ｂ
Ｔ
T1
□MK063(0201)
0.37
0.67
0.45max.
0.42max.
□WK105(0204) ※
□MK105(0402) （*1 C）
□MK105(0402) （*1 P）
2.0±0.05
0.65
1.15
0.4max.
0.3max.
0.42max.
Unit：mm
0.45max.
Note *1 Thickness, C：0.2mm ,P：0.3mm. ※ LW Reverse type.
●Punched carrier tape （2mm pitch）
Chip Cavity
Type(EIA)
Insertion Pitch
Ｆ
Tape Thickness
Ｔ
Ａ
Ｂ
□MK105 (0402)
□VK105 (0402)
0.65
1.15
2.0±0.05
0.8max.
Unit：mm
●Punched carrier tape （4mm pitch）
Chip Cavity
Insertion Pitch
Ｆ
Tape Thickness
Ｔ
Type(EIA)
Ａ
Ｂ
□MK107(0603)
□WK107(0306)
□MR107(0603)
□MK212(0805)
□WK212(0508)
□MK316(1206)
※
※
1.0
1.8
1.1max.
4.0±0.1
1.65
2.0
2.4
3.6
1.1max.
Note：Taping size might be different depending on the size of the product. ※ LW Reverse type.
Unit：mm
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_pack_e-E02R01
●Embossed tape（4mm wide）
Chip Cavity
Insertion Pitch
Ｆ
Tape Thickness
Type(EIA)
Ａ
Ｂ
K
T
□MK042(01005)
□VS042(01005)
0.23
0.43
1.0±0.02
0.5max.
0.25max.
Unit：mm
●Embossed tape（8mm wide）
Chip Cavity
Insertion Pitch
Ｆ
Tape Thickness
Type(EIA)
Ａ
Ｂ
K
T
□WK107(0306) ※
□MK212(0805)
1.0
1.8
1.3max.
0.25±0.1
1.65
2.0
2.4
3.6
3.6
□MR212(0805)
4.0±0.1
□MK316(1206)
3.4max.
0.6max.
□MR316(1206)
□MK325(1210)
2.8
□MR325(1210)
Note： ※ LW Reverse type.
Unit：mm
●Embossed tape（12mm wide）
Chip Cavity
Insertion Pitch
Tape Thickness
Type(EIA)
Ａ
Ｂ
Ｆ
K
T
□MK432(1812)
3.7
4.9
8.0±0.1
4.0max.
0.6max.
Unit：mm
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_pack_e-E02R01
④Trailer and Leader
Blank portion
Chip cavity
Blank portion
Leader
100mm or more
160mm or more
(3.94inches or more)
(6.3inches or more)
400mm or more
(15.7inches or more)
Direction of tape feed
⑤Reel size
t
E
C
B
A
R
D
W
A
B
C
φ13.0±0.2
D
E
R
φ178±2.0
φ50min.
φ21.0±0.8
2.0±0.5
1.0
T
W
4mm wide tape
8mm wide tape
12mm wide tape
1.5max.
2.5max.
2.5max.
5±1.0
10±1.5
14±1.5
Unit：mm
⑥Top Tape Strength
The top tape requires a peel-off force of 0.1 to 0.7N in the direction of the arrow as illustrated below.
Pull direction
0～20°
Top tape
Base tape
⑦Bulk Cassette
The exchange of individual specification is necessary.
Please contact Taiyo Yuden sales channels.
Slider
Shutter
2.0＋0/－0.1
1.0＋0/－0.1
1.5＋0.1/－0
12±0.1
Connecting Port
36＋0/－0.2
110±0.7
Unit：mm
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_pack_e-E02R01
Super Low Distortion Multilayer Ceramic Capacitors , Medium-High Voltage Multilayer Ceramic Capacitors and
High Reliability Application Multilayer Ceramic Capacitors are noted separately.
Multilayer Ceramic Capacitors
■RELIABILITY DATA
1.Operating Temperature Range
Standard
Temperature
－55 to ＋125℃
Compensating（Class1）
High Frequency Type
Specification
Temperature Range
－25 to ＋85℃
－55 to ＋85℃
－55 to ＋125℃
－55 to ＋105℃
－55 to ＋125℃
－55 to ＋85℃
－25 to ＋85℃
－30 to ＋85℃
B
BJ
X5R
X7R
X6S
X7S
X5R
F
Specified
Value
B7
C6
High Permittivity （Class2）
C7
LD(※)
F
Y5V
Note: ※LD Low distortion high value multilayer ceramic capacitor
2. Storage Conditions
Temperature
Standard
－55 to ＋125℃
Compensating（Class1）
High Frequency Type
Specification
Temperature Range
－25 to ＋85℃
－55 to ＋85℃
－55 to ＋125℃
－55 to ＋105℃
－55 to ＋125℃
－55 to ＋85℃
－25 to ＋85℃
－30 to ＋85℃
B
BJ
X5R
X7R
X6S
X7S
X5R
F
Specified
Value
B7
C6
High Permittivity （Class2）
C7
LD(※)
F
Y5V
Note: ※LD Low distortion high value multilayer ceramic capacitor
3. Rated Voltage
Standard
50VDC, 25VDC, 16VDC
Temperature
Specified
Value
Compensating（Class1）
High Frequency Type 50VDC, 25VDC, 16VDC
50VDC, 35VDC, 25VDC, 16VDC, 10VDC, 6.3VDC, 4VDC, 2.5VDC
High Permittivity （Class2）
4. Withstanding Voltage （Between terminals）
Temperature
Specified
Standard
Compensating（Class1）
High Frequency Type No breakdown or damage
Value
High Permittivity （Class2）
Class 1
Class 2
Rated voltage×2.5
Test
Applied voltage
Methods and
Duration
Rated voltage×3
1 to 5 sec.
50mA max.
Remarks
Charge/discharge current
5. Insulation Resistance
Temperature
Standard
High Frequency Type
10000 MΩ min.
Compensating（Class1）
Specified
Value
C≦0.047μF : 10000 MΩ min.
C＞0.047μF : 500MΩ・μF
High Permittivity （Class2） Note 1
Test
Applied voltage
Duration
: Rated voltage
Methods and
Remarks
: 60±5 sec.
: 50mA max.
Charge/discharge current
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-E02R01
6. Capacitance （Tolerance）
Temperature
0.2pF≦C≦5pF
0.2pF≦C≦10pF
C＞10pF
: ±0.25pF
C□
U□
SL
Standard
: ±0.5pF
: ±5% or ±10%
Compensating（Class1）
Specified
Value
0.2pF≦C≦2pF
C＞2pF
: ±0.1pF
: ±5%
High Frequency Type
CH
BJ, B7, C6, C7, LD(※) : ±10% or ±20%,
F : ＋80/－20%
High Permittivity （Class2）
Note: ※LD Low distortion high value multilayer ceramic capacitor
Class 1
High Frequency Type
Class 2
Standard
C≦10μF
C＞10μF
Test
Preconditioning
None
Thermal treatment （at 150℃ for 1hr） Note 2
Methods and
Remarks
Measuring frequency
Measuring voltage Note
Bias application
1ＭHz±10%
0.5 to 5Vrms
1kHz±10%
1±0.2Vrms
120±10Hz
0.5±0.1Vrms
None
7. Q or Dissipation Factor
C＜30pF : Q≧400＋20C
C≧30pF : Q≧1000
Standard
Temperature
Compensating（Class1）
（C：Nominal capacitance）
Specified
Value
High Frequency Type Refer to detailed specification
High Permittivity （Class2） Note 1
BJ, B7, C6, C7：2.5% max., F：7% max.
Class 1
Class 2
Standard
High Frequency Type
C≦10μF
C＞10μF
Preconditioning
None
Thermal treatment （at 150℃ for 1hr） Note 2
Test
Measuring frequency
Measuring voltage Note 1
Bias application
1ＭHz±10%
1GHz
1ｋHz±10%
1±0.2Vrms
120±10Hz
Methods and
Remarks
0.5 to 5Vrms
0.5±0.1Vrms
None
High Frequency Type
Measuring equipment
Measuring jig
: HP4291A
: HP16192A
8. Temperature Characteristic （Without voltage application）
Temperature Characteristic ［ppm/℃］
Tolerance ［ppm/℃］
C□ :
0
CG,CH, CJ, CK
G : ±30
H : ±60
J : ±120
K : ±250
Standard
U□ : －750
UJ, UK
Temperature
Compensating（Class1）
SL : ＋350 to －1000
Temperature Characteristic ［ppm/℃］
Tolerance ［ppm/℃］
H : ±60
High Frequency Type
C□ :
0
CH
Capacitance
change
Reference
temperature
20℃
Specified
Value
Specification
Temperature Range
B
±10%
－25 to ＋85℃
－55 to ＋85℃
－55 to ＋125℃
－55 to ＋105℃
－55 to ＋125℃
－55 to ＋85℃
－25 to ＋85℃
－30 to ＋85℃
BJ
X5R
X7R
X6S
X7S
X5R
F
±15%
25℃
B7
C6
±15%
25℃
High Permittivity （Class2）
±22%
25℃
C7
±22%
25℃
LD(※)
±15%
25℃
＋30/－80%
＋22/－82%
20℃
F
Y5V
25℃
Note : ※LD Low distortion high value multilayer ceramic capacitor
Class 1
Capacitance at 20℃ and 85℃ shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the
following equation.
（C85－C20）
×106（ppm/℃）
C20×△T
△T＝65
Test
Class 2
Methods and
Remarks
Capacitance at each step shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the following
equation.
Step
B、F
X5R、X7R、X6S、X7S、Y5V
Minimum operating temperature
1
2
3
20℃
25℃
Maximum operating temperature
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-E02R01
（C－C2）
C2
×100（%）
C
：Capacitance in Step 1 or Step 3
C2 ：Capacitance in Step 2
9. Deflection
Appearance
Capacitance change : Within ±5% or ±0.5 pF, whichever is larger.
Appearance : No abnormality
Capacitance change : Within±0.5 pF
Appearance : No abnormality
: No abnormality
Standard
Temperature
Compensating（Class1）
High Frequency Type
Specified
Value
Capacitance change : Within ±12.5%（BJ, B7, C6, C7,LD(※)）
Within ±30%（F）
High Permittivity （Class2）
Note: ※LD Low distortion high value multilayer ceramic capacitor
Multilayer Ceramic Capacitors
042, 063, ※105 Type
The other types
Board
Glass epoxy-resin substrate
Test
Thickness
Warp
0.8mm
1.6mm
Methods and
Remarks
1mm
Duration
10 sec.
※105 Type thickness, C： 0.2mm ,P： 0.3mm.
Capacitance measurement shall be conducted
with the board bent
10. Body Strength
Standard
－
Temperature
Specified
Value
Compensating（Class1）
High Frequency Type No mechanical damage.
－
High Permittivity （Class2）
High Frequency Type
Applied force
Duration
: 5N
Test
: 10 sec.
Methods and
Remarks
11. Adhesive Strength of Terminal Electrodes
Temperature
Standard
Specified
Compensating（Class1）
High Frequency Type No terminal separation or its indication.
Value
High Permittivity （Class2）
Multilayer Ceramic Capacitors
042, 063 Type
2N
105 Type or more
5N
Test
Methods and
Remarks
Applied force
Duration
30±5 sec.
12. Solderability
Standard
High Frequency Type At least 95% of terminal electrode is covered by new solder.
Temperature
Specified
Value
Compensating（Class1）
High Permittivity （Class2）
Eutectic solder
H60A or H63A
230±5℃
Lead-free solder
Sn-3.0Ag-0.5Cu
245±3℃
Test
Solder type
Methods and
Remarks
Solder temperature
Duration
4±1 sec.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-E02R01
13. Resistance to Soldering
Appearance
: No abnormality
Capacitance change
Q
: Within ±2.5% or ±0.25pF, whichever is larger.
: Initial value
Standard
Insulation resistance
Withstanding voltage
: Initial value
（between terminals） : No abnormality
Temperature
Compensating（Class1）
Appearance
: No abnormality
Capacitance change
Q
: Within ±2.5%
: Initial value
High Frequency Type
Specified
Value
Insulation resistance
Withstanding voltage
: Initial value
（between terminals） : No abnormality
Appearance
: No abnormality
Capacitance change
: Within ±7.5%（BJ, B7, C6, C7, LD(※)）
Within ±20%（F）
High Permittivity （Class2） Note 1
Dissipation factor
: Initial value
Insulation resistance
Withstanding voltage
: Initial value
（between terminals）: No abnormality
Note: ※LD Low distortion high value multilayer ceramic capacitor
Class 1
042, 063 Type
105 Type
Preconditioning
Preheating
None
80 to 100℃, 2 to 5 min.
150 to 200℃, 2 to 5 min.
270±5℃
150℃, 1 to 2 min.
Solder temp.
Duration
3±0.5 sec.
Recovery
6 to 24 hrs （Standard condition） Note 5
Test
Methods and
Remarks
Class 2
105, 107, 212 Type
042、063 Type
316, 325 Type
Preconditioning
Preheating
Thermal treatment （at 150℃ for 1 hr） Note 2
80 to 100℃, 2 to 5 min.
150 to 200℃, 2 to 5 min.
270±5℃
80 to 100℃, 5 to 10 min.
150 to 200℃, 5 to 10 min.
150℃, 1 to 2 min.
Solder temp.
Duration
3±0.5 sec.
Recovery
24±2 hrs （Standard condition） Note 5
14. Temperature Cycle (Thermal Shock）
Appearance
: No abnormality
Capacitance change
Q
: Within ±2.5% or ±0.25pF, whichever is larger.
: Initial value
Standard
Insulation resistance
Withstanding voltage
: Initial value
（between terminals） : No abnormality
Temperature
Compensating（Class1）
Appearance
: No abnormality
Capacitance change
Q
: Within ±0.25pF
: Initial value
High Frequency Type
Specified
Value
Insulation resistance
Withstanding voltage
: Initial value
（between terminals） : No abnormality
Appearance
: No abnormality
Capacitance change
: Within ±7.5% （BJ, B7, C6, C7, LD(※)）
Within ±20% （F）
High Permittivity （Class2） Note 1
Dissipation factor
: Initial value
Insulation resistance
Withstanding voltage
: Initial value
（between terminals） : No abnormality
Note: ※LD Low distortion high value multilayer ceramic capacitor
Class 1
None
Class 2
Thermal treatment （at 150℃ for 1 hr）
Note 2
Preconditioning
Step
Temperature（℃）
Time（min.）
Test
1
2
3
4
Minimum operating temperature
Normal temperature
30±3
2 to 3
30±3
2 to 3
Methods and
Remarks
1 cycle
Maximum operating temperature
Normal temperature
Number of cycles
Recovery
5 times
6 to 24 hrs （Standard condition） Note 5
24±2 hrs （Standard condition） Note 5
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-E02R01
15. Humidity （Steady State）
Appearance
: No abnormality
Capacitance change
Q
: Within ±5% or ±0.5pF, whichever is larger.
: C＜10pF : Q≧200＋10C
Standard
10≦C＜30pF : Q≧275＋2.5C
C≧30pF:Q≧350（C：Nominal capacitance）
: 1000 MΩ min.
Temperature
Compensating（Class1）
Insulation resistance
Appearance
: No abnormality
: Within ±0.5pF,
: 1000 MΩ min.
Specified
Value
High Frequency Type Capacitance change
Insulation resistance
Appearance
: No abnormality
Capacitance change
: Within ±12.5% （BJ, B7, C6, C7, LD(※)）
Within ±30% （F）
High Permittivity （Class2） Note 1
Dissipation factor
: 5.0% max.（BJ, B7, C6, C7, LD(※)）
11.0% max.（F）
Insulation resistance
: 50 MΩμF or 1000 MΩ whichever is smaller.
Note: ※LD Low distortion high value multilayer ceramic capacitor
Class 1
Class 2
All items
Standard
40±2℃
High Frequency Type
60±2℃
Preconditioning
Temperature
Humidity
None
Thermal treatment（ at 150℃ for 1 hr） Note 2
40±2℃
Test
Methods and
Remarks
90 to 95%RH
90 to 95%RH
Duration
500＋24/－0 hrs
500＋24/－0 hrs
Recovery
6 to 24 hrs （Standard condition） Note 5
24±2 hrs （Standard condition） Note 5
16. Humidity Loading
Appearance
: No abnormality
Capacitance change
: Within ±7.5% or ±0.75pF, whichever is larger.
: C＜30pF：Q≧100＋10C/3
Standard
Q
C≧30pF：Q≧200 （C：Nominal capacitance）
: 500 MΩ min.
Insulation resistance
Temperature
Compensating（Class1）
Appearance
: No abnormality
Capacitance change
: C≦2pF：Within ±0.4 pF
C＞2pF：Within ±0.75 pF
（C：Nominal capacitance）
: 500 MΩ min.
High Frequency Type
Specified
Value
Insulation resistance
Appearance
: No abnormality
Capacitance change
: Within ±12.5% （BJ, B7, C6, C7, LD(※)）
Within ±30% （F）
High Permittivity （Class2） Note 1
Dissipation factor
: 5.0% max. （BJ, B7, C6, C7, LD(※)）
11.0% max. （F）
Insulation resistance
: 25 MΩμF or 500 MΩ, whichever is smaller.
Note: ※LD Low distortion high value multilayer ceramic capacitor
Class 1
Class 2
Standard
High Frequency Type
All items
Preconditioning
Voltage treatment
None
（Rated voltage are applied for 1 hour at 40℃） Note 3
Temperature
Humidity
40±2℃
60±2℃
40±2℃
Test
Methods and
Remarks
90 to 95%RH
500＋24/－0 hrs
Rated voltage
90 to 95%RH
Duration
500＋24/－0 hrs
Rated voltage
Applied voltage
Charge/discharge
current
50mA max.
50mA max.
Recovery
6 to 24 hrs （Standard condition） Note 5
24±2 hrs（Standard condition） Note 5
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-E02R01
17. High Temperature Loading
Appearance
: No abnormality
Capacitance change
Q
: Within ±3% or ±0.3pF, whichever is larger.
: C＜10pF： Q≧200＋10C
Standard
10≦C＜30pF：Q≧275＋2.5C
C≧30pF： Q≧350（C：Nominal capacitance）
: 1000 MΩ min.
Temperature
Compensating（Class1）
Insulation resistance
Appearance
: No abnormality
Specified
Value
High Frequency Type Capacitance change
Insulation resistance
: Within ±3% or ±0.3pF, whichever is larger.
: 1000 MΩ min.
Appearance
: No abnormality
Capacitance change
: Within ±12.5% （BJ, B7, C6, C7, LD(※)）
Within ±30% （F）
High Permittivity （Class2） Note 1
Dissipation factor
: 5.0% max.（BJ, B7, C6, C7, LD(※)）
11.0% max.（F）
Insulation resistance
: 50 MΩμF or 1000 MΩ, whichever is smaller.
Note: ※LD Low distortion high value multilayer ceramic capacitor
Class 1
High Frequency Type
Class 2
C6
Standard
BJ, LD(※), F
B7, C7
Voltage treatment（Twice the rated voltage shall be applied for
1 hour at 85℃, 105℃ or 125℃） Note 3, 4
Maximum operating temperature
Preconditioning
None
Temperature
Duration
Maximum operating temperature
1000＋48/－0 hrs
Test
1000＋48/－0 hrs
Methods and
Remarks
Applied voltage
Charge/discharge
current
Rated voltage×2
Rated voltage×2 Note 4
50mA max.
50mA max.
Recovery
6 to 24hr （Standard condition） Note 5
24±2 hrs （Standard condition） Note 5
Note: ※LD Low distortion high value multilayer ceramic capacitor
Note 1 The figures indicate typical specifications. Please refer to individual specifications in detail.
Note 2 Thermal treatment : Initial value shall be measured after test sample is heat-treated at 150＋0/－10℃ for an hour and kept at room temperature for
24±2hours.
Note 3 Voltage treatment : Initial value shall be measured after test sample is voltage-treated for an hour at both the temperature and voltage specified in
the test conditions, and kept at room temperature for 24±2hours.
Note 4 150% of rated voltage is applicable to some items. Please refer to their specifications for further information.
Note 5 Standard condition: Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa When there are questions concerning
measurement results, in order to provide correlation data, the test shall be conducted under the following condition.
Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa Unless otherwise specified, all the tests are conducted under the
"standard condition".
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-E02R01
Multilayer Ceramic Capacitors , Medium-High Voltage Multilayer Ceramic Capacitors and
High Reliability Application Multilayer Ceramic Capacitors are noted separately.
Super Low Distortion Multilayer Ceramic Capacitors （CFCAPTM）
■RELIABILITY DATA
1. Operating Temperature Range
Specified Value
－55 to ＋125℃
2. Storage Temperature Range
Specified Value
－55 to ＋125℃
3. Rated Voltage
Specified Value
6.3VDC, 10VDC, 16VDC, 25VDC, 35VDC, 50VDC
4. Dielectric Withstanding Voltage （Between terminals）
Specified Value
No breakdown or damage
Applied voltage
Duration
: Rated voltage×3
: 1 to 5 sec.
Test Methods and
Remarks
Charge/discharge current
: 50mA max.
５．Insulation Resistance
Specified Value
10000 MΩ or 500MΩμF, whichever is smaller
Applied voltage
Duration
: Rated voltage
: 60±5 sec.
: 50mA max.
Test Methods and
Remarks
Charge/discharge current
6．Capacitance （Tolerance）
Specified Value
±10％
Measuring frequency
Measuring voltage
Bias application
: 1kHz±10%
Test Methods and
Remarks
: 1±0.2Vrms
: None
７．Dissipation Factor
Specified Value
0.1%max
Measuring frequency
Measuring voltage
Bias application
: 1kHz±10%
: 1±0.2Vrms
: None
Test Methods and
Remarks
8．Bending Strength
Specified Value
Appearance
: No abnormality
: ±5%
Capacitance change
Warp
: 1mm
: 0.5mm/second
Speed
Duration
Test board
Thickness
: 10 seconds
: glass epoxy resin substrate
: 1.6mm
Test Methods and
Remarks
Capacitance measurement shall be conducted with the board bent.
9．Adhesive Force of Terminal Electrodes
Specified Value
Terminal electrodes shall be no exfoliation or a sign of exfoliation.
Applied force
Duration
: 5N
: 30 ±5 seconds
Test Methods and
Remarks
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_CFcap_reli_e-E02R01
10．Solderability
Specified Value
At least 95% of terminal electrode is covered by new solder.
Eutectic solder
Lead-free solder
Sn-3.0Ag-0.5Cu
245±3℃
Solder type
H60A or H63A
230±5℃
Test Methods and
Remarks
Solder temperature
Duration
4±1 sec.
11．Resistance to Soldering Heat
Appearance
: No abnormality
Capacitance change
: ±2.5% max.
: Initial value
: Initial value
Specified Value
Dissipation factor
Insulation resistance
Withstanding voltage
（between terminals） : No abnormality
Solder temp.
: 270 ±5℃
Duration
: 3 ±0.5 sec.
Test Methods and
Remarks
Preheating conditions
: 80 to 100℃, 2 to 5 min. or 5 to 10 min.
150 to 200℃, 2 to 5 min. or 5 to 10 min.
Measurement shall be conducted
: 24±2hrs under the standard condition Note1
12．Temperature Cycle （Thermal Shock）
Appearance
: No abnormality
Capacitance change
: ±2.5% max
Specified Value
Dissipation factor
: Initial value
Insulation resistance
Withstanding voltage
: Initial value
（between terminals）: No abnormality
Conditions for 1 cycle
Step
temperature（℃）
Minimum operating temperature
Normal temperature
Time（min.）
30±3 min.
2 to 3 min.
30±3 min.
2 to 3 min.
1
2
3
4
Test Methods and
Remarks
Maximum operating temperature
Normal temperature
Number of cycles: 5 times
Measurement shall be conducted : 24±2hrs under the standard condition Note1
13．Humidity （Steady state）
Appearance
: No abnormality
Capacitance change
Dissipation factor
: ±5% max
Specified Value
: 0.5% max
Insulation resistance
: 50MΩμF or 1000MΩ, whichever is smaller
Temperature
: 40±2℃
Test Methods and Humidity
: 90 to 95% RH
: 500 ＋24/－0 hrs
Remarks
Duration
Measurement shall be conducted
: 24 ±2hrs under the standard condition Note1
14．Humidity Loading
Specified Value
Appearance
: No abnormality
Capacitance change
Dissipation factor
Insulation resistance
: ±7.5% max
: 0.5% max
: 25MΩμF or 500MΩ, whichever is smaller
According to JIS C 5102 clause 9.9.
Temperature
: 40±2℃
Test Methods and Humidity
: 90 to 95% RH
: 500 ＋24/－0 hrs
Remarks
Duration
Applied voltage
: Rated voltage
Charge/discharge current
Measurement shall be conducted
: 50mA max
: 24 ±2hrs under the standard condition Note1
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_CFcap_reli_e-E02R01
15．High Temperature Loading
Appearance
: No abnormality
Capacitance change
: ±3% max
Specified Value
Dissipation factor
: 0.35% max
Insulation resistance
: 50MΩμF or 1000MΩ, whichever is smaller
According to JIS C 5102 clause 9.10.
Temperature
: Maximum operating temperature
: 1000 ＋48/－0 hrs
: Rated voltage x 2
Test Methods and
Remarks
Duration
Applied voltage
Charge/discharge current
Measurement shall be conducted
: 50mA max
: 24 ±2hrs under the standard condition Note1
Note1 Standard condition: Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa
When there are questions concerning measurement results, in order to provide correlation data, the test shall be conducted under the following
condition.
Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa
Unless otherwise specified, all the tests are conducted under the "standard condition".
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_CFcap_reli_e-E02R01
Multilayer Ceramic Capacitors , Super Low Distortion Multilayer Ceramic Capacitors and
High Reliability Application Multilayer Ceramic Capacitors are noted separately.
Medium-High Voltage Multilayer Ceramic Capacitor
■RELIABILITY DATA
1. Operating Temperature Range
X7R, X7S : －55 to ＋125℃
Specified Value
X5R
B
: －55 to ＋85℃
: －25 to ＋85℃
2. Storage Temperature Range
X7R, X7S : －55 to ＋125℃
Specified Value
X5R
B
: －55 to ＋85℃
: －25 to ＋85℃
3. Rated Voltage
Specified Value
100VDC(HMK), 250VDC(QMK), 630VDC(SMK)
4. Withstanding Voltage（Between terminals）
Specified Value
No breakdown or damage
Applied voltage
Duration
: Rated voltage×2.5（HMK）, Rated voltage×2（QMK）, Rated voltage×1.2（SMK）
Test Methods and
Remarks
: 1 to 5sec.
: 50mA max.
Charge/discharge current
5. Insulation Resistance
Specified Value
100MΩ・μF or 10GΩ, whichever is smaller.
Applied voltage
Duration
: Rated voltage（HMK, QMK）, 500V（SMK）
Test Methods and
Remarks
: 60±5sec.
: 50mA max.
Charge/discharge current
6. Capacitance （Tolerance）
Specified Value
±10%, ±20%
Measuring frequency
Measuring voltage
Bias application
: 1kHz±10%
: 1±0.2Vrms
: None
Test Methods and
Remarks
7. Dissipation Factor
Specified Value
3.5%max（HMK）
2.5%max（QMK, SMK）
Measuring frequency
Measuring voltage
Bias application
: 1kHz±10%
: 1±0.2Vrms
: None
Test Methods and
Remarks
8. Temperature Characteristic of Capacitance
B
: ±10%（－25 to ＋85℃）
: ±15%（－55 to ＋85℃）
X5R
X7R
X7S
Specified Value
: ±15%（－55 to ＋125℃）
: ±22%（－55 to ＋125℃）
Capacitance value at each step shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the
following equation.
Step
B
X5R、X7R、X7S
Minimum operating temperature
20℃ 25℃
1
2
3
Test Methods and
Remarks
Maximum operating temperature
（C－C2）
C2
×100（%）
C
: Capacitance value in Step 1 or Step 3
C2 : Capacitance value in Step 2
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_mhv_reli_e-E02R01
9. Deflection
Appearance
: No abnormality
: Within±10%
Specified Value
Capacitance change
Warp
: 1mm
: 10sec.
Duration
Test board
Thickness
: Glass epoxy-resin substrate
: 1.6mm
Test Methods and
Remarks
Capacitance measurement shall be conducted with the board bent.
10. Adhesive Strength of Terminal Electrodes
Specified Value
No terminal separation or its indication.
Applied force
Duration
: 5N
: 30±5sec.
Test Methods and
Remarks
11. Solderability
Specified Value
At least 95% of terminal electrode is covered by new solder
Eutectic solder
Lead-free solder
Sn-3.0Ag-0.5Cu
245±3℃
Solder type
H60A or H63A
230±5℃
Test Methods and
Remarks
Solder temperature
Duration
4±1 sec.
12. Resistance to Soldering
Appearance
: No abnormality
Capacitance change
Dissipation factor
: Within±15%（HMK）, ±10%（QMK, SMK）
: Initial value
Specified Value
Insulation resistance
Withstanding voltage
: Initial value
（between terminals） : No abnormality
Preconditioning
: Thermal treatment（at 150℃ for 1hr） Note1
: 270±5℃
Solder temperature
Test Methods and Duration
Remarks Preheating conditions
: 3±0.5sec.
: 80 to 100℃, 2 to 5 min.
150 to 200℃, 2 to 5min.
Recovery
: 24±2hrs under the standard condition Note3
13. Temperature Cycle （Thermal Shock）
Appearance
: No abnormality
Capacitance change
Specified Value
: Within±15%（HMK）, ±7.5%（QMK, SMK）
: Initial value
Dissipation factor
Insulation resistance
: Initial value
Preconditioning : Thermal treatment （at 150℃ for 1hr） Note1
Conditions for 1 cycle
Step
Temperature（℃）
Minimum operating temperature
Normal temperature
Time（min.）
30±3min.
2 to 3min.
30±3min.
2 to 3min.
1
2
3
4
Test Methods and
Remarks
Maximum operating temperature
Normal temperature
Number of cycles : 5 times
Recovery : 24±2hrs under the standard condition Note3
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_mhv_reli_e-E02R01
14. Humidity （Steady state）
Appearance
: No abnormality
Capacitance change
Dissipation factor
: Within±15%
Specified Value
: 7%max（HMK）, 5%max（QMK, SMK）.
: 25MΩμF or 1000MΩ, whichever is smaller.
Insulation resistance
Preconditioning
Temperature
Humidity
: Thermal treatment（at 150℃ for 1hr） Note1
: 40±2℃
Test Methods and
Remarks
: 90 to 95%RH
: 500 ＋24/－0 hrs
Duration
Recovery
: 24±2hrs under the standard condition Note3
15. Humidity Loading
Specified Value
Appearance
: No abnormality
Capacitance change
Dissipation factor
Insulation resistance
: Within±15%
: 7%max（HMK）, 5%max（QMK, SMK）.
: 10MΩμF or 500MΩ, whichever is smaller.
According to JIS 5102 clause 9.9.
Preconditioning
Temperature
: Voltage treatment Note2
: 40±2℃
Test Methods and Humidity
Remarks Applied voltage
: 90 to 95%RH
: Rated voltage
Charge/discharge current
Duration
: 50mA max.
: 500 ＋24/－0 hrs
: 24±2hrs under the standard condition Note3
Recovery
16. High Temperature Loading
Appearance
: No abnormality
Capacitance change
Dissipation factor
: Within±15%
Specified Value
: 7%max（HMK）, 5%max（QMK, SMK）.
: 50MΩμF or 1000MΩ, whichever is smaller.
Insulation resistance
According to JIS 5102 clause 9.10.
Preconditioning
Temperature
: Voltage treatment Note2
: Maximum operating temperature
: Rated voltage×2（HMK）
Rated voltage×1.5（QMK）
Rated voltage×1.2（SMK）
: 50mA max.
Applied voltage
Test Methods and
Remarks
Charge/discharge current
Duration
: 1000 ＋24/－0 hrs
Recovery
: 24±2hrs under the standard condition Note3
Note1 Thermal treatment : Initial value shall be measured after test sample is heat-treated at 150＋0/－10℃ for an hour and kept at
24±2hours.
room temperature for
Note2 Voltage treatment : Initial value shall be measured after test sample is voltage-treated for an hour at both the temperature and voltage specified in the
test conditions, and kept at room temperature for 24±2hours.
Note3 Standard condition : Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa
When there are questions concerning measurement results, in order to provide correlation data, the test shall be conducted
under the following condition.
Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa
Unless otherwise specified, all the tests are conducted under the "standard condition".
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_mhv_reli_e-E02R01
High Reliability Application Multilayer Ceramic Capacitors are noted separately.
Precautions on the use of Multilayer Ceramic Capacitors
■PRECAUTIONS
1. Circuit Design
◆Verification of operating environment, electrical rating and performance
1. A malfunction of equipment in fields such as medical, aerospace, nuclear control, etc. may cause serious harm to human life or have
severe social ramifications.
Therefore, any capacitors to be used in such equipment may require higher safety and reliability, and shall be clearly differentiated from
them used in general purpose applications.
Precautions
◆Operating Voltage （Verification of Rated voltage）
1. The operating voltage for capacitors must always be their rated voltage or less.
If an AC voltage is loaded on a DC voltage, the sum of the two peak voltages shall be the rated voltage or less.
For a circuit where an AC or a pulse voltage may be used, the sum of their peak voltages shall also be the rated voltage or less.
2. Even if an applied voltage is the rated voltage or less reliability of capacitors may be deteriorated in case that either a high frequency AC
voltage or a pulse voltage having rapid rise time is used in a circuit.
2. PCB Design
◆Pattern configurations （Design of Land-patterns）
1. When capacitors are mounted on PCBs, the amount of solder used （size of fillet） can directly affect the capacitor performance.
Therefore, the following items must be carefully considered in the design of land patterns:
（1）Excessive solder applied can cause mechanical stresses which lead to chip breaking or cracking. Therefore, please consider
appropriate land-patterns for proper amount of solder.
Precautions
（2）When more than one component are jointly soldered onto the same land, each component's soldering point shall be separated by
solder-resist.
◆Pattern configurations （Capacitor layout on PCBs）
After capacitors are mounted on boards, they can be subjected to mechanical stresses in subsequent manufacturing processes （PCB
cutting, board inspection, mounting of additional parts, assembly into the chassis, wave soldering of the boards, etc.）. For this reason, land
pattern configurations and positions of capacitors shall be carefully considered to minimize stresses.
◆Pattern configurations （Design of Land-patterns）
The following diagrams and tables show some examples of recommended land patterns to prevent excessive solder amounts.
（1）Recommended land dimensions for typical chip capacitors
●Multilayer Ceramic Capacitors : Recommended land dimensions
Land patterns for PCBs
Land pattern
（unit: mm）
Solder-resist
Wave-soldering
Chip capacitor
Type
107
1.6
212
2.0
316
3.2
325
3.2
L
C
Size
W
0.8
1.25
1.6
2.5
A
B
C
0.8 to 1.0
0.5 to 0.8
0.6 to 0.8
1.0 to 1.4
0.8 to 1.5
0.9 to 1.2
1.8 to 2.5
0.8 to 1.7
1.2 to 1.6
1.8 to 2.5
0.8 to 1.7
1.8 to 2.5
B
A
B
Chip capacitor
W
L
Technical
Reflow-soldering
Type 042
considerations
063
0.6
105
1.0
107
1.6
0.8
212
2.0
316
325
3.2
2.5
432
4.5
L
0.4
3.2
Size
W
0.2
0.3
0.5
1.25
1.6
3.2
A
B
C
0.15 to 0.25
0.15 to 0.20
0.15 to 0.30
0.20 to 0.30
0.20 to 0.30
0.25 to 0.40
0.45 to 0.55
0.40 to 0.50
0.45 to 0.55
0.8 to 1.0
0.8 to 1.2
0.8 to 1.2
0.9 to 1.6
1.8 to 2.5
1.0 to 1.5
1.2 to 2.0
1.8 to 2.5
1.0 to 1.5
1.8 to 3.2
2.5 to 3.5
1.5 to 1.8
2.3 to 3.5
0.6 to 0.8
0.6 to 0.8
Note：Recommended land size might be different according to the allowance of the size of the product.
LWDC
●LWDC: Recommended land dimensions for reflow-soldering
（unit: mm）
Type
105
0.52
107
0.8
212
1.25
L
W
Size
W
1.0
1.6
2.0
A
B
C
0.18 to 0.22
0.2 to 0.25
0.9 to 1.1
0.25 to 0.3
0.3 to 0.4
1.5 to 1.7
0.5 to 0.7
0.4 to 0.5
1.9 to 2.1
L
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_prec_e-E02R01
（2）Examples of good and bad solder application
Item
Not recommended
Recommended
Solder-resist
Lead wire of component
Mixed mounting of SMD and
leaded components
Chassis
Solder-resist
Solder (for grounding)
Component placement close to
the chassis
Electrode pattern
Lead wire of component
Soldering iron
Solder-resist
Hand-soldering of leaded
components near mounted
components
Solder-resist
Horizontal component
placement
◆Pattern configurations （Capacitor layout on PCBs）
1-1. The following is examples of good and bad capacitor layouts ; capacitors shall be located to minimize any
stresses from board warp or deflection.
possible mechanical
Items
Not recommended
Recommended
Place the product at a right
angle to the direction of the
anticipated mechanical
stress.
Deflection of board
1-2. The amount of mechanical stresses given will vary depending on capacitor layout. Please refer to diagram below.
E
D
Perforation
C
A
B
Slit
Magnitude of stress A＞B＝C＞D＞E
1-3. When PCB is split, the amount of mechanical stress on the capacitors can vary according to the method used. The following methods
are listed in order from least stressful to most stressful: push-back, slit, V-grooving, and perforation. Thus, please consider the PCB,
split methods as well as chip location.
3. Mounting
Precautions
◆Adjustment of mounting machine
1. When capacitors are mounted on PCB, excessive impact load shall not be imposed on them.
2. Maintenance and inspection of mounting machines shall be conducted periodically.
◆Selection of Adhesives
1. When chips are attached on PCBs with adhesives prior to soldering, it may cause capacitor characteristics degradation unless the
following factors are appropriately checked : size of land patterns, type of adhesive, amount applied, hardening temperature and
hardening period. Therefore, please contact us for further information.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_prec_e-E02R01
◆Adjustment of mounting machine
1. When the bottom dead center of a pick-up nozzle is too low, excessive force is imposed on capacitors and causes damages. To avoid
this, the following points shall be considerable.
（1）The bottom dead center of the pick-up nozzle shall be adjusted to the surface level of PCB without the board deflection.
（2）The pressure of nozzle shall be adjusted between 1 and 3 N static loads.
（3）To reduce the amount of deflection of the board caused by impact of the pick-up nozzle, supporting pins or back-up pins shall be
used on the other side of the PCB. The following diagrams show some typical examples of good and bad pick-up nozzle
placement:
Item
Improper method
Proper method
chipping
or cracking
Single-sided mounting
supporting pins
or back-up pins
Double-sided mounting
chipping
or cracking
supporting pins
or back-up pins
2. As the alignment pin is worn out, adjustment of the nozzle height can cause chipping or cracking of capacitors because of mechanical
impact on the capacitors.
Technical
considerations
To avoid this, the monitoring of the width between the alignment pins in the stopped position, maintenance, check and replacement of
the pin shall be conducted periodically.
◆Selection of Adhesives
Some adhesives may cause IR deterioration. The different shrinkage percentage of between the adhesive and the capacitors may result in
stresses on the capacitors and lead to cracking. Moreover, too little or too much adhesive applied to the board may adversely affect
components. Therefore, the following precautions shall be noted in the application of adhesives.
（1）Required adhesive characteristics
a. The adhesive shall be strong enough to hold parts on the board during the mounting & solder process.
b. The adhesive shall have sufficient strength at high temperatures.
c. The adhesive shall have good coating and thickness consistency.
d. The adhesive shall be used during its prescribed shelf life.
e. The adhesive shall harden rapidly.
f. The adhesive shall have corrosion resistance.
g. The adhesive shall have excellent insulation characteristics.
h. The adhesive shall have no emission of toxic gasses and no effect on the human body.
（2）The recommended amount of adhesives is as follows;
［Recommended condition］
Amount adhesive
After capacitor are bonded
a
a
Figure
212/316 case sizes as examples
a
b
c
0.3mm min
100 to 120μm
b
Adhesives shall not contact land
c
c
4. Soldering
◆Selection of Flux
Since flux may have a significant effect on the performance of capacitors, it is necessary to verify the following conditions prior to use;
（1）Flux used shall be less than or equal to 0.1 wt%（ in Cl equivalent） of halogenated content. Flux having a strong acidity content shall
not be applied.
（2）When shall capacitors are soldered on boards, the amount of flux applied shall be controlled at the optimum level.
（3）When water-soluble flux is used, special care shall be taken to properly clean the boards.
Precautions
◆Soldering
Temperature, time, amount of solder, etc. shall be set in accordance with their recommended conditions.
Sn-Zn solder paste can adversely affect MLCC reliability.
Please contact us prior to usage of Sn-Zn solder.
◆Selection of Flux
1-1. When too much halogenated substance（Chlorine, etc.） content is used to activate flux, or highly acidic flux is used, it may lead to
corrosion of terminal electrodes or degradation of insulation resistance on the surfaces of the capacitors.
1-2. Flux is used to increase solderability in wave soldering. However if too much flux is applied, a large amount of flux gas may be emitted
and may adversely affect the solderability. To minimize the amount of flux applied, it is recommended to use a flux-bubbling system.
1-3. Since the residue of water-soluble flux is easily dissolved in moisture in the air, the residues on the surfaces of capacitors in high
humidity conditions may cause a degradation of insulation resistance and reliability of the capacitors. Therefore, the cleaning
methods and the capability of the machines used shall also be considered carefully when water-soluble flux is used.
Technical
considerations
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_prec_e-E02R01
◆Soldering
･ Ceramic chip capacitors are susceptible to thermal shock when exposed to rapid or concentrated heating or rapid cooling.
･ Therefore, the soldering must be conducted with great care so as to prevent malfunction of the components due to excessive thermal
shock.
･ Preheating : Capacitors shall be preheated sufficiently, and the temperature difference between the capacitors and solder shall be within
100 to 130℃.
･ Cooling : The temperature difference between the capacitors and cleaning process shall not be greater than 100℃.
［Reflow soldering］
【Recommended conditions for eutectic
soldering】
300
【Recommended condition for Pb-free
soldering】
300
Peak
Preheating
230℃
260℃ Max.
Within 10sec.
Within 10sec.
60sec. 60sec
Min.
Min.
200
100
0
200
Slow
Slow cooling
cooling
100
Heating above
230℃
Preheating150℃
60sec. Min.
40sec. Max.
0
1/2T～1/3T
Caution
Capacitor
PC board
①The ideal condition is to have solder mass（fillet）controlled to 1/2 to 1/3 of the
thickness of a capacitor.
Solder
T
②Because excessive dwell times can adversely affect solderability, soldering duration shall
be kept as close to recommended times as possible.
［Wave soldering］
【Recommended conditions for eutectic
【Recommended condition for Pb-free
soldering】
soldering】
300
300
Peak
260℃ Max.
Within 10sec.
230～250℃
Within 3sec.
Preheating
120sec. Min.
120sec. Min.
200
200
100
0
Slow
cooling
Slow cooling
Preheating
150℃
100
0
Caution
①Wave soldering must not be applied to capacitors designated as for reflow soldering only.
［Hand soldering］
【Recommended conditions for eutectic
【Recommended condition for Pb-free
soldering】
soldering】
400
400
400
300
200
100
0
Peak
350℃ Max.
Within 3sec.
Peak
280℃ Max.
Within 3sec.
230～280℃
Within 3sec.
300
300
⊿T
Slow cooling
200
Slow cooling
⊿T
200
Slow cooling
Preheating
150℃ Min.
Preheating
150℃ Min.
100
100
Preheating
60sec. Min.
0
60sec. Min.
60sec. Min.
0
⊿T
⊿T
⊿T≦130℃
316type or less
⊿T≦150℃
325type or more
Caution
①Use a 50W soldering iron with a maximum tip diameter of 1.0 mm.
②The soldering iron shall not directly touch capacitors.
5. Cleaning
Precautions
◆Cleaning conditions
1. When PCBs are cleaned after capacitors mounting, please select the appropriate cleaning solution in accordance with the intended use
of the cleaning. （e.g. to remove soldering flux or other materials from the production process.）
2. Cleaning condition shall be determined after it is verified by using actual cleaning machine that the cleaning process does not affect
capacitor's characteristics.
1. The use of inappropriate cleaning solutions can cause foreign substances such as flux residue to adhere to capacitors or deteriorate
their outer coating, resulting in a degradation of the capacitor's electrical properties （especially insulation resistance）.
2. Inappropriate cleaning conditions（ insufficient or excessive cleaning） may adversely affect the performance of
In the case of ultrasonic cleaning, too much power output can cause excessive vibration of PCBs which may lead
the capacitors.
to the
Technical
cracking of capacitors or the soldered portion, or decrease the terminal electrodes' strength. Therefore, the following conditions shall
be carefully checked;
considerations
Ultrasonic output :
20 W/ℓ or less
40 kHz or less
Ultrasonic frequency :
Ultrasonic washing period : 5 min. or less
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_prec_e-E02R01
6. Resin coating and mold
1. With some type of resins, decomposition gas or chemical reaction vapor may remain inside the resin during the
while left under normal storage conditions resulting in the deterioration of the capacitor's performance.
hardening period or
Precautions
2. When a resin's hardening temperature is higher than capacitor's operating temperature, the stresses generated by the excessive heat
may lead to damage or destruction of capacitors.
The use of such resins, molding materials etc. is not recommended.
7. Handling
◆Splitting of PCB
1. When PCBs are split after components mounting, care shall be taken so as not to give any stresses of deflection or twisting to the board.
2. Board separation shall not be done manually, but by using the appropriate devices.
Precautions
◆Mechanical considerations
Be careful not to subject capacitors to excessive mechanical shocks.
（1）If ceramic capacitors are dropped onto a floor or a hard surface, they shall not be used.
（2）Please be careful that the mounted components do not come in contact with or bump against other boards or
components.
8. Storage conditions
◆Storage
1. To maintain the solderability of terminal electrodes and to keep packaging materials in good condition, care must be taken to control
temperature and humidity in the storage area. Humidity should especially be kept as low as possible.
・Recommended conditions
Ambient temperature : Below 30℃
Humidity
: Below 70% RH
Precautions
The ambient temperature must be kept below 40℃. Even under ideal storage conditions, solderability of capacitor is deteriorated as
time passes, so capacitors shall be used within 6 months from the time of delivery.
・Ceramic chip capacitors shall be kept where no chlorine or sulfur exists in the air.
2. The capacitance values of high dielectric constant capacitors will gradually decrease with the passage of time, so
care shall be
taken to design circuits . Even if capacitance value decreases as time passes, it will get back to the initial value by a heat treatment at
150℃ for 1hour.
If capacitors are stored in a high temperature and humidity environment, it might rapidly cause poor solderability due to terminal oxidation and
quality loss of taping/packaging materials. For this reason, capacitors shall be used within 6 months from the time of delivery. If exceeding the
above period, please check solderability before using the capacitors.
Technical
considerations
※RCR-2335B（Safety Application Guide for fixed ceramic capacitors for use in electronic equipment）is published by JEITA.
Please check the guide regarding precautions for deflection test, soldering by spot heat, and so on.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_prec_e-E02R01
相关型号：
TMK212B7473MD-T
CAP CER 0.047UF 25V X7R 0805Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TAIYO YUDEN
TMK212B7474KG-T
CAP CER 0.47UF 25V X7R 0805Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TAIYO YUDEN
TMK212B7474KG8T
MLCC (High dielectric type) for Telecommunications infrastructure and Industrial equipment / Medical devicesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TAIYO YUDEN
TMK212B7474KGHT
CAP CER 0.47UF 25V X7R 0805Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TAIYO YUDEN
TMK212B7474MG8T
MLCC (High dielectric type) for Telecommunications infrastructure and Industrial equipment / Medical devicesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TAIYO YUDEN
TMK212B7474MGHT
Multilayer Ceramic Capacitors (High dielectric type) for AutomotiveWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TAIYO YUDEN
TMK212B7475G
Notice for TAIYO YUDEN productsãWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TAIYO YUDEN
TMK212B7475KG-D
Ceramic Capacitor, Multilayer, Ceramic, 25V, 10% +Tol, 10% -Tol, X7R, -/+15ppm/Cel TC, 4.7uF, 0805,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TAIYO YUDEN
TMK212B7475MG
Ceramic Capacitor, Multilayer, Ceramic, 25V, 20% +Tol, 20% -Tol, X7R, -/+15ppm/Cel TC, 4.7uF, 0805,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TAIYO YUDEN
TMK212B7475MG-D
Ceramic Capacitor, Multilayer, Ceramic, 25V, 20% +Tol, 20% -Tol, X7R, -/+15ppm/Cel TC, 4.7uF, 0805,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TAIYO YUDEN
TMK212B7683KD-T
CAP CER 0.068UF 25V X7R 0805Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TAIYO YUDEN
TMK212B7683MD-T
CAP CER 0.068UF 25V X7R 0805Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TAIYO YUDEN
©2020 ICPDF网 联系我们和版权申明